Posts: 68
Threads: 7
Joined: Oct 2017
City: bloomfield, ct
Hi, Yet another newbie here.
I received a very clean 90X ( 2 type 47 push pull output tubes model) from the family that purchased it new in Bridgeport, CT in 1932.
I am in the "getting to know you" phase with this radio and noticed that the field coil on the speaker seem to be loose. I can move the coil 1/8" front to back and it will slightly twist around the armature.
This aroused my "I know enough to make me dangerous" gene which brought me to the forum to ask if the field coil was cemented or perhaps wedged in place? I don't think that loose is correct.
Any thoughts?
Thanks in advance,
Fran
Posts: 5,170
Threads: 274
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Can't answer your question but
Welcome to the Phorum!
Posts: 16,512
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I don't think it's a problem.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
I've had speakers like that myself that seem to work fine. If it works ok, just leave it alone.
No matter where you go, there you are.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I've noticed that a lot of the older Philco speakers have field coils that appear to be loose.
As Mike and Jayce said, leave it alone, it's likely OK as long as it isn't shorted to the frame.
--
Ron Ramirez
Ferdinand IN
Posts: 68
Threads: 7
Joined: Oct 2017
City: bloomfield, ct
Posts: 68
Threads: 7
Joined: Oct 2017
City: bloomfield, ct
Thanks for the replies.
I will leave it alone.
Fran
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
