Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Need some assistance
#1

I just purchased a Philco Ford radio and record player sold in a nice cabinet. Unfortunately the record player doesn’t work.  I think it’s due to the motor no longer working and would like to get it fixed. 

I would like to know the make model and year and would like to know if you recommended a place where it can be refurbished. 

Please see the attached “unit Identification” sticker
#2

Welcome!
We'll be glad to help. 1st things 1st, your attachment is not showing up. Either you need to upload the image to the Phorum, or upload it to a image sharing service, and include a link in your post linking to the image on the hosting site. Others more experienced can give you exact details.

Blessings,
Jeff W.
Jonesboro, Arkansas

http://jeffsradios.weebly.com

God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
#3

Welcome to the Phorum!

A guide to using image sharing services with the Phorum can be found here:

http://philcoradio.com/phorum/showthread.php?tid=4371
#4

Thanks Jeff, I appreciate your welcome!  Ok, I’ll just type it out, lol

(Upper left corner) 307279 (upper middle) 351610 3 (lower middle) 8576813 (lower right) 1297 C96

Also model C 120 D is stamped in blue underneath the record player.
#5

Welcome to the Phorum!
Icon_wave

Ford bought Philco in 1961 so its no older than that.
#6

Wondering if anyone has any information based on the numbers I posted.
#7

Unfortunately the "newer" units like yours have less info availble. Much of the data is for pre- WW2 an the following decade.
#8

Thanks Bob. All I know so far that it was made after 1966.  I’ll try to get some pictures up to see if that helps.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
Ok guys. Thanks for the input. As for AI this is why I ask the experts. Dandconant — 07:39 AM
Philco 71 Code 125
Technically, that's C-. B- is chassis ground. The resistor between chassis ground and the HV center tap makes the HV c...MrFixr55 — 11:24 PM
54C Cabinet Refinish
hello Roy, I’d follow Arran’s suggestion and use automotive gasket material, which I keep around for situations like th...radiorich — 10:22 PM
Philco 71 Code 125
This might be one of those cases where it's a ground to an AC voltage and B- to DC.RodB — 08:22 PM
Philco 71 Code 125
Really Rod? I know you would not steer me wrong but AI say this is a short circuit? What if I moved the 6 volt center ta...dconant — 06:40 PM
54C Cabinet Refinish
Roy; Personally I would have left the asbestos alone if it were my set, but you can find a modern substitute that som...Arran — 04:51 PM
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM

[-]
Who's Online
There are currently no members online.

>