38-690 Refinish June Update
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Sure, you can do it that way - by hand. I use a 3M polishing compound for lacquer and a pneumatic buffer with a foam pad.
A fresh, gloss lacquer finish is too shiny unless buffed out and the process will level other imperfections as well. Normally I will wet sand first with ~1500 wet/dry.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Beautiful X2...
DO mine now, 
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 285
Threads: 18
Joined: Nov 2016
City: Cromwell
State, Province, Country: CT
Kirk,
Thanks for the compliments.
We don’t live too far apart LOL  and I know you have one waiting.
I need to get through mine first. Right now my head is spinning trying to figure out how to finish it off. I like the gloss look, but was it really glossy when new? Then there is the fact that I don’t have the fancy orbital sander yet, so now what? 
Don’t get too much in Kutztown
Tony
“People may not remember how fast you did a job, but they will remember how well you did it”
Posts: 4,106
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Tony,
I have already bought 4 radios and I have not even gotten there,
Thats about all I am getting unless I find a real nice addition or a Halson.
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I think they were all glossy.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 285
Threads: 18
Joined: Nov 2016
City: Cromwell
State, Province, Country: CT
I found this Mohawk product on the Mohawk website. I don’t know if anyone has used this or a similar product. Looks to be right up my alley. Let me know what you think.
http://www.mohawk-finishing.com/catalog_...ictNbr=251
They also have a level 2 product.
http://magicwoodrepair.com/items/Rubbing...s/list.htm
Tony
“People may not remember how fast you did a job, but they will remember how well you did it”
Posts: 285
Threads: 18
Joined: Nov 2016
City: Cromwell
State, Province, Country: CT
Posts: 16,508
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
It looks great.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 481
Threads: 18
Joined: Jan 2013
City: Mesa, AZ
I wouldn't kick that one out of my living room! Beautiful job!!! 
Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Posts: 4,442
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Super deluxe, a real beaut of a job.
Paul
Tubetalk1
Posts: 1,385
Threads: 45
Joined: Nov 2017
City: Menlo Park
State, Province, Country: CA
Beautiful!
I don't hold with furniture that talks.
Posts: 189
Threads: 22
Joined: Aug 2018
City: Kewanee
State, Province, Country: Illinois
Absolutely Gorgeous!!! Fantastic job!
1929 Victor R-32, 1933 60L, Phil 40-158, Phil 42-400X, Phil 47-1230 Radio/Phono,, 1950 Phil TV t-1104, Air King 4000, Philco 41-105, Philco 37-675, RCA Victor 9K2, PT-50, Phil 54C, PT-44 Cabinet, Phil 118X Cabinet
Gregg
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco model 38 code 121 not receiving signal.
|
| Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM |
|
Philco model 38 code 121 not receiving signal.
|
| It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM |
|
Philco model 38 code 121 not receiving signal.
|
| I've reinstalled the coil. Now IT'S ALIVE!!!!!!
I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM |
|
Philco model 38 code 121 not receiving signal.
|
| Yes, Walmart, right up there with Fluke.RodB — 11:00 AM |
|
PT 6 chassis screws size???
|
| it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM |
|
Philco model 38 code 121 not receiving signal.
|
|
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM |
|
Philco model 38 code 121 not receiving signal.
|
| Thankyou for the kind words sir.
I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM |
|
PT 6 chassis screws size???
|
| Hello bridKarl,
that sounds right or maybe 8/32 .
Sincerely Richardradiorich — 01:00 AM |
|
PT 6 chassis screws size???
|
| Have this done except for missing chassis screws.
It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Hello Stormlord,
Well done on rewinding that coil it turned fairly good for your first one.
Sincerely Richardradiorich — 09:12 PM |
|
Who's Online
|
There are currently 857 online users. [Complete List]
» 2 Member(s) | 855 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
