Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Philco 48-2500?
#1

A local antiques dealer just finally sent me pictures of a television he told me about over the winter. It appears to be a Philco 48-2500 console with the projection set! I am not sure about persuing this item because of space and because it also seems to use an odd CRT. What would this be worth in decent, looking to be complete condition? Any help and advice on this unit would be appreciated.

No matter where you go, there you are.
#2

If it's the projection set, the blonde cabinet will be worth more than the mahogany. The blonde is a prototype and the mahogany is the production model. A price guide I have from eleven years ago puts it $125 in good condition and complete. It is likely for the production set. This one does use an odd CRT. It has an octal base instead of the typical 14 pin base. Check it out and see.

Visit the world's worst TV restoration website.

http://evilfurnaceman.tripod.com
#3

I'll have to try and get a look at it in person. It doesn't look blonde, but looks lighter than mahogany in the pictures he sent me. The piece is in his private storage, so I might have to wait to see it. I have a few old sets and they can be fun and a curse at the same time. If you get them restored and use them too much, they die. If you don't use them enough, they die. I might pass on this critter and aim him towards another buyer.

No matter where you go, there you are.
#4

I have an extra CRT and various other extra parts for a 48-2500 in the event you are still interested in this set and it's still around.
#5

Looking for a good flyback transformer for this set? Icon_wave thanks, chip




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 71 Code 125
Looks like that might be the B- buss, so that would be correct.RodB — 01:32 PM
Philco 71 Code 125
I noticed on the code 121 schematic the center tap for the 6 volt winding and hv winding are tied together. Is this corr...dconant — 12:16 PM
Philco 45-6365 Universal IFT Instruction Manual
The Philco Parts Catalog for 1942 shows it as usable for 175 kHz, 260 kHz, and 465 kHz. The instructions will show how t...DaleHCook — 11:19 AM
Stromberg Carlson 1500 Squeal
Hello Rob, I agree with you—I have one here at my house that I need to check out. It’s way over-engineered just to make...radiorich — 11:05 AM
My Atwater Kent 84
Well getting around to restoring my AK84. Mike was a big part in me being able to snatch this one a few years ago. I won...462ron — 10:57 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
The engine is a B&S 23 inch cast Iron holds 2 quarts of oil. The Generator is a 4 pole 1800 rpm mine was made in 195...David — 10:51 AM
Philco 45-6365 Universal IFT Instruction Manual
Dale: Modified topic as suggested. It is not for a specific project. I found it in a box of stuff I recently purchased...GRG — 10:34 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind ... That is a MIL-5015 style connector, used in a wide v...DaleHCook — 10:19 AM
Philco P45-6365 Universal Transformer Instruction Manual
I would suggest changing the topic from "P45-6365 Universal Transformer" to "45-6365 Universal IFT."...DaleHCook — 10:08 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated. By dconant. Dittos'Jimradio — 08:01 AM

[-]
Who's Online
There are currently 2170 online users. [Complete List]
» 1 Member(s) | 2169 Guest(s)
Avatar

>