Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Need help with info identifying my Radio
#1

I picked up a Philco Radio at an auction recently, and I'm having a little bit of a tough time identifying it. I'm pretty sure it is a 1933, and I'm pretty sure it's a model 19, but the code is 123, which I can't seem to find any information on. I see a code 122, 126, 128, but I don't see anything about a 123. This is my first old Philco, so I know absolutely nothing about them. Any information you guys can give me would be greatly appreciated. I have some other questions about it, but I figure I'll start with general info on the radio.

Note from site admin: Sorry, but the photos which were attached to this post are no longer available.
#2

You can get photocopies of original Philco service lit through my website.
See the Schematic Info page for all the details.

Chuck
#3

Hello, Krick27, and welcome.

Very nice find! The 19B in the older Code 123 configuration is not as common as the more easily found Code 126. This is the first 19 to add the "police" band and a fourth knob; the 19-121 and 19-122 were AM only with 3 knobs.

Yes, it is from 1933.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philcorepairbench.com - shadow-meter
Hi, Try here Philco Service Hints & Tips, Number 1 It's from the web archive (Way Back Machine).Keith — 10:17 AM
PT-6 finished!!
Hi Arran,  Yes, you are correct, the "nominal" voltage for these Loctal tubes was the same 6.3 or 12.6 V as...MrFixr55 — 07:48 AM
PT-6 finished!!
Actually the Loctal tube series, with number beginning with "14" are 12.6 volt tubes, at 150 ma, I'm not sure ...Arran — 02:14 AM
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM

[-]
Who's Online
There are currently 823 online users. [Complete List]
» 1 Member(s) | 822 Guest(s)
Avatar

>