Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Grundig 3068 Hi-Fi Zauberklang
#1

I found this today for cheap.  Everything works, except the EM34 tuning eye tube.  It's been playing in a guy's garage for years. He purchased it in Germany in the 1950's. 

I'm always amazed when I see these radios....they are huge.  It sounds great, and the tuner is very sensitive. The cabinet is very clean, as is the dial. There just a small bit of laminate separation at the bottom of one side, that I will be gluing down. 

My first old German radio.

A bunch of odd looking jacks in the back. Can any of these be used to plug in an MP3 player or Bluetooth receiver?  what sort of plugs would it take?

Is there a manual in ENGLISH for these?

Thanks

Grundig 3068 Hi-Fi Zauberklang
[Image: https://i.imgur.com/x9r3Mxa.jpg?1]
#2

Deutchse Intstiut Normung forgive my spelling, usually these have a DIN type jack, my Grundig does, try something like this...............

https://www.amazon.com/TNP-Converter-Equ...4675&psc=1

More info..............

https://en.wikipedia.org/wiki/DIN_connector

My pal Ross who is a Euro Radio Whiz explained to me once that the reason German Engineers get so much performance from minimal tube counts is that radios in Germany were taxed on the amount of tubes they had, so if you keep tube count down you could sell for less. 

My Grundig plays well but the laminate is cracking and pulling off, another one sounds better than looks. 

Good luck. 

Paul

Tubetalk1
#3

I don't see a 5 pin DIN socket. Here is whats back there:

[Image: https://i.imgur.com/4dJCwXj.jpg?1]

[Image: https://i.imgur.com/0CBbZNy.jpg]
#4

How bout this/

https://www.ebay.com/itm/Emud-Grundig-Ra...2816358401

Maybe you can translate the other connector text. 

If no more answers here you can pm me and I can see if I can put you in touch with someone who would know. 

Paul

Tubetalk1
#5

Thanks. I do believe that's what I need.
#6

Hmm - I don't think those are all DIN connectinons. The plug has an outer shell - and I don't see a circular groove around the sockets labeled "HiFi Strahler" and "Fern Dirigent"

Using these terms, I found this thread on the UK vintage site:

https://vintage-radio.net/forum/showthread.php?t=104996

It seems the HiFi socket is an output, and the other was for a remote control system.

The "Tonbandergerat" connection is a DIN type for a tape recorder, and is the most likely possibility to connect a music source. Aufname and Weidergabe translate as recording and playback, suggesting that the radio could be used as a source, and high quality means of listening to recordings.

I don't hold with furniture that talks.
#7

The tuner on this radio is quite good. It is picking up stations quite clearly that my other radios struggle with.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM
philco predicta
Hi CGL18, First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens: ...MrFixr55 — 08:22 AM
Another amp build - here I go again!
Sweet! I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM
PT-6 finished!!
Hi Gang, Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM

[-]
Who's Online
There are currently 1089 online users. [Complete List]
» 1 Member(s) | 1088 Guest(s)
Avatar

>