Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Rolltop Model 10647E
#1

A few questions.
Does anyone know the date for this model;?
I turned it on and it hummed but I received no station.
It appears that a component is missing ( by opening the back ).  There is a hanging 5 prong connector.  Is something missing?  There is a large empty space at the bottom of the cabinet.
Anyone?
#2

Hi Archy -

The number 10647E doesn't sound like a model number. Do you have a photo you could share?

Philco made a couple of different 'rolltop' models. From your description it sounds like it might be a console model - perhaps a 38-690?

https://philcoradio.com/gallery2/1938a/#Model_38-690XX

For portable units there's models like the 46-350:

https://philcoradio.com/gallery2/1946a/#Model_46-350
#3

Quote:L
#4

The number was on a sticker inside the cabinet.
#5

here is your radio sometimes confused as a 10647. It is as said above a model 46-350.
There is nothing missing. That is the battery hookup. The lower half is where the batteries go.

Icon_smile


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Electrolytic restuffing/internals
I don’t have a vise so I had to hold it in my hand. Not optimal but covered up by the hvac tape in the end. I have a few...bridkarl — 11:52 PM
Electrolytic restuffing/internals
Bridkarl A question. For a hacksaw the cut looks a little...jagged. Why?morzh — 11:45 PM
The list of my radio & TV collection!
As usual, an interesting post from you, Peter. This seems to be similar to the RCA 3-BX-671 and the Zenith Transoceanic...MrFixr55 — 11:41 PM
The list of my radio & TV collection!
Hello Peter, Thank you for sharing your new video and looks like your weather is nice their too. it was like 25 Cel...radiorich — 11:05 PM
Electrolytic restuffing/internals
hello bridkarl, I will post some better photos ! Sincerely Richardradiorich — 10:14 PM
Electrolytic restuffing/internals
I just taped the two pieces of the cap together, but I can see your method is better. I just held the lead in with solde...bridkarl — 08:18 PM
Electrolytic restuffing/internals
hello bridkarl, Well done ! Here is a Photo of the base of Philco capacitor that I cut open you can see how I glued th...radiorich — 08:14 PM
philco predicta
Hi CGL18, Here is a link for the schematic from the Early television Foundation: WARNING!! One side of the Chassis i...MrFixr55 — 08:09 PM
The list of my radio & TV collection!
Peter; I like Canadian General Electric sets, whilst the model numbers are often the same as their U.S General Electr...Arran — 05:44 PM
Electrolytic restuffing/internals
Did as suggested. Cut can with hacksaw, removed internals, attached new 8mf cap - with ample use of cardboard and elec...bridkarl — 03:36 PM

[-]
Who's Online
There are currently 1230 online users. [Complete List]
» 1 Member(s) | 1229 Guest(s)
Avatar

>