Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

OLD BOGEN AMP PLEASE ID
#1

Need ID on this Bogen Amp..  I cannot read the model number?

Maybe someone else Can? 

Has 7 tubes 6F5,6F5,6C8,6F8,6L6,6L6 5X4

Pictures...

[Image: https://live.staticflickr.com/65535/5027...dee3_c.jpg]

[Image: https://live.staticflickr.com/65535/5027...5873_c.jpg]

[Image: https://live.staticflickr.com/65535/5027...96e2_c.jpg]

Thanks

Skip
#2

Looked all over and this is the closest I could find. It has 10 tubes instead of seven.
There is also a DX 18 but tube line up also not a match.
https://www.radiomuseum.org/r/bogen_ampl...dx_30.html
#3

Thanks

I did find (With help from other Forum) That the model D30 seems to match the tube lineup..Looks the same also..

He even sent me a schematic..

Skip
#4

Neat! Reminds me I must start work on the duo of DB 130 amps and tuner lurking in our front room. They make a nice stereo pair Icon_smile

I don't hold with furniture that talks.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

[-]
Who's Online
There are currently no members online.

>