Posts: 29
Threads: 2
Joined: Sep 2017
City: wentzville, mo.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
That is really a nice radio. Seems like I have said this recently, but, " I would certainly make room for one more console" if I found one of those.
Post some pictures please , of the top and bottom of the chassis when you get it out.
Is your helper a dog or a cat?
Russ
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
(This post was last modified: 05-10-2021, 10:20 PM by Phlogiston.)
Posts: 16,512
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
It's a cat.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,889
Threads: 214
Joined: May 2015
City: Seattle
State, Province, Country: WA
One of my favorite Philco models!
Here are photos from when I restored mine. I find comparing to other examples of the same set can be pretty useful.
https://flic.kr/s/aHsmEva2kc
Posts: 29
Threads: 2
Joined: Sep 2017
City: wentzville, mo.
Lol It is a Cat. A Russian Blue to be exact. Coolest best Cat weve had. Super laid back. Anyway I do intend to post more photos and of course questions. Still working full time running a small business so bare with me if you would. Nathan thanks for the link great series of photos. Will post again soon.
Bob
Posts: 16,512
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Yeah.....I figured it was a cat by the tail. It is a cat's tail.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
It looked so much like Fuzzy when he used to hang out at the shop. Now he likes to sleep behind the WR8-R. I think he likes the ticking of the old clock.
Looking forward to pictures.
P.S. Fuzzy is the one driving the ATV, with me behind him.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 365
Threads: 76
Joined: Oct 2014
City: Winter Haven, FL
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Very nice.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 29
Threads: 2
Joined: Sep 2017
City: wentzville, mo.
His name is Coady and this is his favorite photo, when he was posing for Play Cat magazine.
Posts: 29
Threads: 2
Joined: Sep 2017
City: wentzville, mo.
Patrick very nice work. Hoping to get some advice on what toners and such to use when I get to the cabinet. I have had decent success refinishing cabinets on a few others, hope mine turns out as nice as yours. These are gorgeous radios when refinished right.
Posts: 29
Threads: 2
Joined: Sep 2017
City: wentzville, mo.
Something thats curious to me is the added on Band Switch you'll see in the photo of the back. Not sure its even a Philco brand, as there is no name, part# or anything on it. Would this have been some sort of option? I did see this same switch in a photo on another 201X on the internet somewhere.
Posts: 29
Threads: 2
Joined: Sep 2017
City: wentzville, mo.
Patrick
I will also need to remake the back panel as you can see in the photo it was pretty beet up, Did you use Masonite and where did you get the label?
Posts: 365
Threads: 76
Joined: Oct 2014
City: Winter Haven, FL
Actually, I misspoke. The entire back wasn't gone, but luckily what was left included the label, which I carefully removed and then glued to the new back.
The back is panelboard, which I bought from an auto upholstry shop. It's used as a backing when re-upholstering car doors. It's the perfect thickness and stiffness, and it has the advantage of being waterproof.
(This post was last modified: 05-12-2021, 10:03 AM by Patrick.)
Posts: 7,301
Threads: 269
Joined: Dec 2009
City: Roslyn Pa
Hi Bob and welcome,
https://philcoradio.com/library/download...201937.pdf Go to pg 3.
I too have a 201X but it's an early one I think as it's in a 200X cabinet. It's been around for a while and I haven't dug in to it yet. It's very much like this one but isn't this the same set. https://www.antiqueradios.com/forums/vie...1&t=206295
Happy to help you go thru your set and who know's maybe I'll get inspired and pull mine out...
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
(This post was last modified: 05-12-2021, 09:25 AM by Radioroslyn.)
Users browsing this thread:
|
|
Recent Posts
|
|
Electrolytic restuffing/internals
|
| I don’t have a vise so I had to hold it in my
hand. Not optimal but covered up by the hvac
tape in the end.
I have a few...bridkarl — 11:52 PM |
|
Electrolytic restuffing/internals
|
| Bridkarl
A question.
For a hacksaw the cut looks a little...jagged. Why?morzh — 11:45 PM |
|
The list of my radio & TV collection!
|
| As usual, an interesting post from you, Peter. This seems to be similar to the RCA 3-BX-671 and the Zenith Transoceanic...MrFixr55 — 11:41 PM |
|
The list of my radio & TV collection!
|
| Hello Peter,
Thank you for sharing your new video and looks like your weather is nice their too.
it was like 25 Cel...radiorich — 11:05 PM |
|
Electrolytic restuffing/internals
|
| hello bridkarl,
I will post some better photos !
Sincerely Richardradiorich — 10:14 PM |
|
Electrolytic restuffing/internals
|
| I just taped the two pieces of the cap together, but I can see your method is better. I just held the lead in with solde...bridkarl — 08:18 PM |
|
Electrolytic restuffing/internals
|
| hello bridkarl,
Well done !
Here is a Photo of the base of Philco capacitor that I cut open you can see how I glued th...radiorich — 08:14 PM |
|
philco predicta
|
| Hi CGL18,
Here is a link for the schematic from the Early television Foundation:
WARNING!! One side of the Chassis i...MrFixr55 — 08:09 PM |
|
The list of my radio & TV collection!
|
| Peter;
I like Canadian General Electric sets, whilst the model numbers are often the same as their U.S General Electr...Arran — 05:44 PM |
|
Electrolytic restuffing/internals
|
|
Did as suggested. Cut can with hacksaw, removed internals, attached new 8mf cap - with ample use of cardboard and elec...bridkarl — 03:36 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
Unfortunately the cabinets were in semi ruff shape, including this one. 
I'm no expert, but have had good success at restoring 4 other radios. For anyone reading this who is considering there first, I literally learned everything I know by ready countless posts from others on this site and a few others. so you could do it to. I've been saving this one, working up the nerve to dive into it. I know it's more complicated, do to it's high fidelity circuitry so will certainly need some advice. I've read the other posts about this radio on this site and researched it on the web. Here are some photos as a start
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
