[NV3G]

I sent the Philco 32-3723 oscillator coil to a friend and he checked it out with an CLR meter.
Here are the results:

3 - 2           0.023               < .1
3 - 4           0.028               < .1
1 - 2           0.046               < .1
1 - 4           0.102               < .1
5 - 6           2.245                 2
3 - 6           0.472                2.5

3 - 6 seems to be the problem. The broadcast oscillator was workiing and quit.
Is there a chance the schematic has the wrong value for 3 - 6  section?
I have changed 26, the 100 pf capacitor.
I have checked all of the switch contacts.
I have changed all of the electrolytic and paper capacitors.


All suggestions are welcome.
Thank you,
nv3g
Oscar