Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

48-482, what a great radio !
#1

Tonight I was listening to KMOX 1120 AM in St. Louis, MO. I was listening to the Cardinals playing the Milwaukee Brewers. I was listening with just the built in antenna of the radio to a station hundreds of miles away, with mountains in between. There was some fading, not to the point where the station was unintelligible, and, for the most part loud and clear. Earlier I had tuned up and down the dial, and found dozens of stations, probably more than 30 coming in clear. What a great radio ! On other nights I have had similar performance listening to shortwave as well as broadcast band, and with FM, the performance is even good through the day. The 48-482 was truly a beautiful design, both aesthetically, and from an engineering standpoint.

[Image: https://64.media.tumblr.com/f349e6d6c808...4931df.jpg]
#2

I noticed the FM range goes to 108. The German Graetz 4R-216 I'm working on was made in 1955 and the FM range goes to 100. Graetz didn't get to 108 for a couple more years. The owner wants me to adjust the tuning so it brings in 102.5.

Same with the 1951 Grundig I restored two years ago. It had a max at 104.
#3

Well, I guess that's what you get when you buy European radios from that period instead of U.S. made, that, and those odd European tube designations some of which have no U.S. equivalent. In my humble opinion, more trouble than they're worth, at least for U.S. restorers.
#4

Very nice! I have one in the closet for 'someday'.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM

[-]
Who's Online
There are currently no members online.

>