01-05-2022, 11:04 AM
Have any of yous guys tried Simon's clever chassis stand on one of these?
So far it's worked flawlessly on all the Philco chassis I've fitted it to. I did have a bit of time with the 200/201 style. It has a large power transformer at the very front so it wants play jew-jitsu and flip the whole thing over. Could be remedy by mounting the stand to a piece of plywood to offset the awkwardness. The early sets like the 76,77,87,95,96,... are easy enough just turn over. Pretty flat on the top and hardly anything to break.
So far it's worked flawlessly on all the Philco chassis I've fitted it to. I did have a bit of time with the 200/201 style. It has a large power transformer at the very front so it wants play jew-jitsu and flip the whole thing over. Could be remedy by mounting the stand to a piece of plywood to offset the awkwardness. The early sets like the 76,77,87,95,96,... are easy enough just turn over. Pretty flat on the top and hardly anything to break.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
