Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

philco 39-31xf IF transformers
#1

Hi guys,
Both of my IF transformers are open and beyond repair with my skill set. I have a spare 41-180 chassis and both of those coils are good. Can I switch them out and go from 470 to 455 kHz or will that cause a whole different set of problems?   https://philcoradio.com/library/download...20Book.pdf

Thanks
Jim
#2

There is no such thing as a 41-180. Do you mean 40-180? Or possibly 41-280?

You should be able to retune the 455 kc IF transformers to the 470 kc frequency without issue.

One thing to note, however. If your spare chassis is a 41-280, keep in mind it has three IF transformers, not two as in the 39-31 and 40-180. You will want to use the first and third IF transformers of the 41-280 to replace the IF transformers in your 39-31.

--
Ron Ramirez
Ferdinand IN
#3

Sorry yes it's a 40-180. That's good news, I will make the switch and retune . Keep up the good fight Ron!




Users browsing this thread:
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
Thanks for your help Michael. In fact, this video is only an intermediate result. Later I had to apply another tinting l...RadioSvit — 09:01 AM
Restoration of the Canadian General Electric A-87
Great job on the cabinet. PS. In the US notation, "kenotron" refers to specific type of tubes; we call re...morzh — 08:24 AM
Part numbers to model cross
This document has at least some tables of models and parts used. Example: Choke 32-7572, used in 604 radio. Search f...morzh — 08:19 AM
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM

[-]
Who's Online
There are currently 1143 online users. [Complete List]
» 1 Member(s) | 1142 Guest(s)
Avatar

>