Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Transitone Model C 1608
#1

Hi everyone,
 I have just taken delivery of an example of this set.When bought I did not even know who the maker was but I have made progress and now have the schematic and associated notes. But at this stage I have not been able to access a picture of this set. And mine is in a sorry state so I am keen to have a look at a picture to see what it should look like. Can anyone suggest where I should look online to see what a good or intact  C 1608  set  looks like?
Thanks everyone and cheers.
#2

Scroll down to 1939 and have a look, it's there.
Plymouth 1 - Identifying Car Radios (google.com)

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

How great to have the Philco Phorum and such well informed people at the helm!I know now that my set is out of a Plymouth as its one remaining knob is brown.Thanks so much.
#4

Here's another pic of it from a '39 Desoto. It's part of the same family of autos. Dodge, Plymouth, Chrysler, and Desoto. I know a guy that is restoring a '39 Desoto but I'm not sure if it has a radio. I'll drop him a note and see what the story is.

http://www.2040-parts.com/1939-radio-chr...-i2221625/

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#5

I did check with my friend out in Colorado to find that his is a different set.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#6

Hi there Radioroslyn, Thank you for checking.And for the picture. Sadly my set,while internally it looks untouched, has suffered the ravages of the weather on the outside . I'm presuming the bottom button of the stack of station pre- select buttons is the one that disables the pre- select and re engages the  manual tuning system. Cheers and thanks. I'll post again when I have started work on it.
#7

I have one that I am recapping.I will try to post pictures.
#8

   
#9

Hi Keefer, Thanks for taking the time to post this picture. Yours is in tiptop condition compared to mine.So its great to see what a good one is like. Mine lacks the grille and has only one knob. Thanks for responding to such an old post Cheers,
#10

No problem.I recapped it and it works pretty good.If need anything else holler at me and i will try and help.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2184 online users. [Complete List]
» 1 Member(s) | 2183 Guest(s)
Avatar

>