Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What year is this radio? Did I overlook it in the Philco library?
#1

                       
#2

Hi,

It is here:

https://philcoradio.com/gallery2/1936b/#Model_84B

It is a mid-season 1936 model (introduced January 1936).

--
Ron Ramirez
Ferdinand IN
#3

Thank you! My parents bought it on an installment plan and paid it out. $20!
JH
#4

Jhammer,
That is a nice looking radio cabinet style !

Sincerely Richard
#5

Thx for your help!!
#6

A later version of the 80Jr. 4 tube Superhet that uses a regenerative detector but sounds amazingly good considering the bare bones circuit. The original 80 Jr sold for $14.95 with tubes in 1933! The 37-84 uses 6J7 Pentodes as the Autodyne 1st Detector and regenerative 2nd detector instead of the 36, and a 6F6 (the octal descendent of the 42) as a power amplifier. A 5Y4 replaces the 80. These sets were marked as a loss leader to get people into the showroom on a bargain for the sales rep to "upsell" the Customer to the better models. Another piece of history, and this being a deceased relative makes it even more special!!

BTW, when you find the correct sw / volume control knob, save that zenith one, they go for about $24.00 a pop on eBuy.

"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
"Let us begin to do good"- St. Francis

Best Regards, 

MrFixr55
#7

Hi JH and Welcome,

> My parents bought it on an installment plan and paid it out. $20!
 
I read an ad that described for the easy payment plan of $2 down and $2 a week this set can be yours. So in about 2 months & 2 weeks it was all yours.

If you wanted to fix it up a bit the dial  https://www.radiodaze.com/philco-37-84-3...m-ds-a318/ (Match pn with old one. There are two different ones.) and knob http://www.renovatedradios.com/product.php?product=20 are available as reproduction parts. It would have had a cloth covered power cord w/one of those old school round flattish plugs on the end. By now the original has about perished. Number 17 would a good match for the grille cloth if you wanted to replace it https://www.radiogrillecloth.com/products

If you need help getting it going there are a number of guys here that can help you out. I'm pretty familiar w/it as I have 5 or 6 of um.[Image: https://philcoradio.com/phorum/images/sm...n_wave.gif]

These are merely suggestions I understand that there may be some reasons to leave it in it's original condition. Just wanted to make you aware that there are some parts that being reproduced for that set.

GL and have fun w/your new project

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#8

Hi JHammer,

I have one of those power plugs that Terry mentioned and it seems to be in good condition. I'll let you have it for the cost of shipping if we can figure out how to do that. Here's a photo.
   
#9

Thanks but I’m not restoring it.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM

[-]
Who's Online
There are currently no members online.

>