Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

What year is this radio? Did I overlook it in the Philco library?
#1

                       
#2

Hi,

It is here:

https://philcoradio.com/gallery2/1936b/#Model_84B

It is a mid-season 1936 model (introduced January 1936).

--
Ron Ramirez
Ferdinand IN
#3

Thank you! My parents bought it on an installment plan and paid it out. $20!
JH
#4

Jhammer,
That is a nice looking radio cabinet style !

Sincerely Richard
#5

Thx for your help!!
#6

A later version of the 80Jr. 4 tube Superhet that uses a regenerative detector but sounds amazingly good considering the bare bones circuit. The original 80 Jr sold for $14.95 with tubes in 1933! The 37-84 uses 6J7 Pentodes as the Autodyne 1st Detector and regenerative 2nd detector instead of the 36, and a 6F6 (the octal descendent of the 42) as a power amplifier. A 5Y4 replaces the 80. These sets were marked as a loss leader to get people into the showroom on a bargain for the sales rep to "upsell" the Customer to the better models. Another piece of history, and this being a deceased relative makes it even more special!!

BTW, when you find the correct sw / volume control knob, save that zenith one, they go for about $24.00 a pop on eBuy.

"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
"Let us begin to do good"- St. Francis

Best Regards, 

MrFixr55
#7

Hi JH and Welcome,

> My parents bought it on an installment plan and paid it out. $20!
 
I read an ad that described for the easy payment plan of $2 down and $2 a week this set can be yours. So in about 2 months & 2 weeks it was all yours.

If you wanted to fix it up a bit the dial  https://www.radiodaze.com/philco-37-84-3...m-ds-a318/ (Match pn with old one. There are two different ones.) and knob http://www.renovatedradios.com/product.php?product=20 are available as reproduction parts. It would have had a cloth covered power cord w/one of those old school round flattish plugs on the end. By now the original has about perished. Number 17 would a good match for the grille cloth if you wanted to replace it https://www.radiogrillecloth.com/products

If you need help getting it going there are a number of guys here that can help you out. I'm pretty familiar w/it as I have 5 or 6 of um.[Image: https://philcoradio.com/phorum/images/sm...n_wave.gif]

These are merely suggestions I understand that there may be some reasons to leave it in it's original condition. Just wanted to make you aware that there are some parts that being reproduced for that set.

GL and have fun w/your new project

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!

Terry
#8

Hi JHammer,

I have one of those power plugs that Terry mentioned and it seems to be in good condition. I'll let you have it for the cost of shipping if we can figure out how to do that. Here's a photo.
   
#9

Thanks but I’m not restoring it.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
My Atwater Kent 84
Well getting around to restoring my AK84. Mike was a big part in me being able to snatch this one a few years ago. I won...462ron — 10:57 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
The engine is a B&S 23 inch cast Iron holds 2 quarts of oil. The Generator is a 4 pole 1800 rpm mine was made in 195...David — 10:51 AM
Philco 45-6365 Universal IFT Instruction Manual
Dale: Modified topic as suggested. It is not for a specific project. I found it in a box of stuff I recently purchased...GRG — 10:34 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind ... That is a MIL-5015 style connector, used in a wide v...DaleHCook — 10:19 AM
Philco P45-6365 Universal Transformer Instruction Manual
I would suggest changing the topic from "P45-6365 Universal Transformer" to "45-6365 Universal IFT."...DaleHCook — 10:08 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated. By dconant. Dittos'Jimradio — 08:01 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
That looks a lot like an aircraft connector of some kind, even if it's a U.S.N power supply. I have a book somewhere abo...Arran — 02:56 AM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
hello david, I have a similar generator in my collection that features a cast iron, single-cylinder Briggs & Stratt...radiorich — 01:00 AM
under chassis parts locator diagram for 1938 Zenith 9s262
Has anyone gone to the trouble of creating an under chassis parts locator image?  Yes, I can identify components by foll...bobloney — 08:57 PM
Plug Voltages Needed For A 1943 CRV-20130 Power Supply
Try looking at this site the book mark is for a old generator that I was given. David    https://radionerds.com/index.ph...David — 08:36 PM

[-]
Who's Online
There are currently 1701 online users. [Complete List]
» 2 Member(s) | 1699 Guest(s)
AvatarAvatar

>