Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zenith K731
#1

https://www.flickr.com/photos/92577012@N...ed-public/

Anyone else have one of these little gems, Nice morning, coffee, music on the radio, sun is up and not too warm. Zenith certainly hung in there as far as longevity in producing decent tube sets, this little guy is proof.

Paul

Tubetalk1
#2

Have the same set, belong to my late father in law. The very first AM FM set that I worked on. There were several business cards on the inside of the set with a date and the repairs.
#3

I have one also Paul. My brother found it at a fundraiser for a cat rescue place. Strangely my grille cloth looks like it has shrunk and although it works I had planned to recap it and replace the selenium rectifier. I think I even ordered the parts for it and a couple other radios of the same vintage from Mouser..... but then we moved, so they are in a box somewhere....

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#4

Paul Philco322 Wrote:Anyone else have one of these little gems

Nope - with one exception I collect only pre-WWII sets. That exception is my H-500 Transoceanic. The reason why I own that model of TO is that, like me, it is a 1951 model.

Dale H. Cook, GR/HP/Tek Collector, Roanoke/Lynchburg, VA
https://plymouthcolony.net/starcity/radios/
#5

I've got one of those and it was still working fine a month ago before I swapped out the radios for daily use. I have a nice plastic version as well, but I think the filter caps and Selenium went poof from the smell it made last time I used it.

No matter where you go, there you are.
#6

I don't own one, but I have worked on them. They are great sounding and good looking set but they were built during the years when the I.F. transformers were susceptible to Silver Migration. You'll know if/when it happens.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM

[-]
Who's Online
There are currently 2366 online users. [Complete List]
» 1 Member(s) | 2365 Guest(s)
Avatar

>