Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco ford console
#1

I was curious if anyone could confirm this was a 1974 console and what the value/additional info on this model please? 

My neighbour mentioned winning this in a raffle in 1974 in victoria, bc. The console, record player & speakers still work.
Thank you


Attached Files Image(s)
           
#2

Solid state, as I suspected. It says so.

I doubt it has high value.
You probably would benefit keeping it, as, after all, it is somewhat of an antique, as it is 70-s for sure, or selling it to someone who really wants to relive 70s.


I am sure there will be people willing to part with $50 - $100 to have it.
In which case (it looks clean) you'd be better off not trying to restore it as, personally speaking, unless I know the person who did the restoration, I automatically presume it is inadequate. And, unfortunately, I have rarely been wrong in that assumption, even when I bought pieces from vendors in Kutztown who, supposedly, knew what they were doing. And so will think many a prospective buyer.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Like most of that sort of thing it's probably worth whatever someone wants to offer for it, I would not say it's worth having someone restore it for resale. Philco was not exactly a high end brand by that time, likely has a standard four speed VM or BSR changer like the coffin stereos did. 
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

[-]
Who's Online
There are currently no members online.

>