Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Best price to offer for a Sencor TC-28?
#1

If this is in the wrong section, I apologize and please move it. A guy I know messaged me on Facebook about a complete Sencor TC-28 tube and transistor checker and I wonder what a good offer would be on it. Ebay is all over the place on this model, but I wouldn't mind a spare tester for later tubes and it also appears to check socketed transistors. It's untested, but is complete with all manuals and tube chart and I want to make a fair offer.

No matter where you go, there you are.
#2

I moved it to Test Equipment.
I saw a TC28 sold for $139 (in untested or not working condition) in April of this year on eBay. Just a data point. With the manual and assuming its in reasonable shape I'd guess something between $150 and $175 would be reasonable and $200 at the top end if you really want it.
#3

Based upon what I have seen of recent prices for other TC-series Sencore models which I have repaired and calibrated I think Bob's answer is in the ballpark

Dale H. Cook, GR/HP/Tek Collector, Roanoke/Lynchburg, VA
https://plymouthcolony.net/starcity/radios/
#4

Thanks for moving this to the correct spot and for the advice. I think I'll throw him $100 for an offer as I remembered he owes me some money for some work I helped him with last year. I want to be fair, but also a little cautious as it is not a tested piece.

No matter where you go, there you are.




Users browsing this thread:
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2259 online users. [Complete List]
» 2 Member(s) | 2257 Guest(s)
AvatarAvatar

>