Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Predicta Repairs Locally in So. Cal.?
#1

Hello,

I have the following TV's that all need some love....
Predicta Princess
Predicta Pedestal
Predicta Tandem
Sylvania Halolight

I have a great repair guy, but he can longer take in new jobs.
If anyone knows someone who does this work in the Southern California area....
I would love to know!

Thank you!

Matt Allyn
#2

Hello Matt. A lot of vintage techs have been hanging up their practices lately. You might want to try contacting the California Historical Radio Society to see if anyone locally can assist you. https://californiahistoricalradio.com
Take care and BE HEALTHY! Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
#3

Saddly, a lot of the techs knowledgable on these older sets are passing away, having health issues and simply aging. The youth doesn't have interest in this. Same with small engines. Those little shops that used to be every few blocks are long gone and a lot of the equipment went in the dumpster and the knowledge went to the grave. I've tried many times to get my son interested but he simply doesn't want to learn.  I went through a rebuild on his truck engine with him helping (not really by choice), and months later, he couldn't even remember how to check the oil! It's a different generation and I figure when I pass, also most of my things will also go to an auction or dumpster, my knowledge to the grave.

If I could find the place called "Somewhere", I could find "Anything" Icon_confused

Tim

Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
#4

Considerable TV data is stored on World Radio History.

Chas

Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
#5

I get that there seems to be less & less who are capable & knowledgeable to play with the vintage TV's. The gent who I have been working with for years is hanging up his schematics & just told me he wished he had someone to teach his craft to. I have a batch of vintage cars & taught my youngest how to pull, rebuild & install a drivetrain for one of them. He is now ALL IN on our vintage car collection. Not sure I can convince him of the vintage electronic game though.

Well...If anyone knows of someone to refer me to; that would be much appreciated.

Matt Allyn




Users browsing this thread: 3 Guest(s)
[-]
Recent Posts
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM
Testing a speaker and output transformer Trutone A2-G
morzh Short-circuited turns can be considered as a half-dead transformer. But on this case transformer will hot and s...Vlad95 — 11:01 AM
Testing a speaker and output transformer Trutone A2-G
I am not sure how a transformer could be weak. It could be inadequate, but only when you replace the original with somet...morzh — 09:56 AM

[-]
Who's Online
There are currently 2254 online users. [Complete List]
» 1 Member(s) | 2253 Guest(s)
Avatar

>