Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 37-84 refinish advise.
#1

Hello from Ireland!
I have got a Philco 37-84 code 122 radio that I am restoring. It needs to be refinished. It has got a finish that I am not familiar with. It appears to be a painted wood grain effect with lighter and darker stripes No veneer, and it is cracking and flaking off. I was hoping that someone could advise me on the best way or the options of refinishing this cabinet.

Thanks in advance
Frank
#2

Hi Frank,

That is called a "Photo Finish," since it's a paper-based "picture" of wood-grain over the base, cheap wood.

See the PHOTO FINISH links for info and repair from the MISC INFO page on my site:

http://www.philcorepairbench.com/misc.htm
#3

Hi Chuck
Thanks for the quick reply.
I had a look at the site. It looks difficult to achieve a original finish particularly when there is stripes through it.
Thanks again for the info.

Regards
frank
#4

Also search the CABINET RESTORATION section of The Antique Radio Forums at http://www.antiqueradios.com

Photo-finishes have been discussed before at length and others have achieved very good results.

Good Luck!

Sláinte!

Chuck




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM

[-]
Who's Online
There are currently no members online.

>