Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Model 95 Main Power X-Former needed
#1

I'm trying to repair a Philco 95 Lowboy (1929?) and after frying the Dual Bias resistor near the 80 tube, I've determined that I have some x-former issues, as I have ~325 on one tap but only ~150 on the other. I show approx 150 ohms to ground, so it looks like I have a few shorts to ground as well as to other windings in the main transformer. Can anyone recommend where to find a replacement? I'd prefer to keep it original as I still have the original speaker cloth and everything else has been updated, so multiple x-formers and modern rectifiers are a last resort only.
Thank you in advance for any and all help!

FB#9
#2

Pull the part number off the transformer (or service info) and see if Play Things of Past has one:

http://www.oldradioparts.com

Other alternative is another 95 junker chassis.
#3

If you don't need to be strictly authentic, a power transformer from Models 96, 111 or 112 will also work. They all look alike topside; the connections underneath differ from the 95 transformer, however.

Please do follow Chuck's advice re: checking with Play Things Of Past. This would be the easiest way for you to find a replacement.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM

[-]
Who's Online
There are currently no members online.

>