Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

116X and the 6A3 tube
#1

Well, I already know my set has weak tubes, in fact one is very weak. Anyhow I used to purchase my tubes from a gent in Ohio (Bill or Bob?), Pick-a-Tube I believe. Heck it's been awhile. Anyhow suggestions on were to purchase them?

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#2

Bob Dobush at Find A Tube.

http://www.findatube.com/

Whenever I need tubes, I usually contact Bob first...great prices, great service, no complaints. A good guy to deal with.

Jim Cross at Vacuum Tubes, Inc. (who used to live in Ohio) is another honest seller.
http://www.vacuumtubesinc.com/

When it comes to tubes, the Ohioans are the good guys...not that the others are bad, only that I've had personal experience buying from both and can recommend either one.

--
Ron Ramirez
Ferdinand IN
#3

Bob would be the guy, thanks Ron.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#4

Comrade, the Russians now make 2A3 for your fine American radio.

http://www.tubedepot.com/so-2a3.html
I think there is a Chinese version as well. Available at K-mart, Martha Stewart brand I think.

But, I would look for a used American one (6A3).

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#5

The same seller also has Sovtek 6A3 tubes. Sold as a matched pair only, $129.95 for the pair.

http://tubedepot.com/so-6a3.html

Don't forget your Tube Cube for your nice, new, expensive Sovtek tubes.

...or, buy two 6A3 tubes from Findatube.com for $28.00 each NOS, or $18.00 each used.

Hmmm...new Sovtek for $129.95 or NOS from Bob for $56.00?

Ask Charlie what he thinks about this choice:
http://www.youtube.com/watch?feature=end...FKfQN5Y7Ds

--
Ron Ramirez
Ferdinand IN
#6

Wow!
Bob does have some very good prices on both new and used. Never have bought tubes from him but he is a good source for Sam's folders. Have gotten some TV folders from him over the years. Good guy and fast service.
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#7

Picture of Bob watching aliens land starship in his back yard:


[attachment=0]

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#8

LOL.... I met Bob about 5/6 years ago at an on-site auction. Naturally plenty of tubes to be auctioned for everyone... Nice guy Icon_wink I did see the Russian versions. But I cannot bring myself to stuff those in one of my fine American made Philco's (or any American radio for that matter). If that's all there was or the American made versions hit $250 a tube, I'll consider it.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#9

From what I've heard from some of my ham buddies the Russian tube are ok but the Chinese jobs are not very good. I'd stay away from them. Agree with Ron a good pair of used US tubes is your best and cheaper way to go. The reliability will the best.
GL and hold on to your wallet.
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#10

I have used Bob several times and he is great to deal with. His prices for 6A3s, 6L6s, and 6B4s are better than what you will find on eBay. Plus his tube for sale listing is huge.




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 844 online users. [Complete List]
» 2 Member(s) | 842 Guest(s)
AvatarAvatar

>