Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

41-788 correct knobs?
#1

Hi all,
New guy here, my name is Mike. I need a little help.
To the point: What are the correct knobs for a Philco Tropic 41-788 (the 2 left and 2 right knobs, the center IS correct)

The story: This Philco has been in my life since I can remember but hasn't worked in years. Now retired, I'm in the process of restoring it. Upon removing the knobs I discovered they are Hallicrafters knobs. Two 15B031 (could be 158031) on the right and two 81-003 on the left. The backs are embossed with manufacture and part#. I knew the righthand knobs were incorrect but had assumed the left one were correct, Wrong! They looked as if they belonged. Suspect my dad had something to do with it as he had several Hallicrafters in his shack.
Anyway, I believe Mr. Jackson (jgj6331) also has the same model Philco.

Thanks,
Mike
#2

Mr. Ramirez has one also, as well as a 42-788. Icon_smile

The two left and two right knobs are identical to the knobs used on 1937-1940 Philco radios; dark brown with a small pointer.

Identical to this knob at Radio Daze:
http://www.radiodaze.com/product/15396.aspx

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM

[-]
Who's Online
There are currently 976 online users. [Complete List]
» 1 Member(s) | 975 Guest(s)
Avatar

>