Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

philco model 44
#1

this is my first post i am restoring a philco model 44 and it has parts removed could use picture of the chaissis in restored or untouched condition to help restore
#2

Welcome! I have a recently acquired 44B, but it's been modified a bit...a 1/4" jack has been added in back of the chassis. If you think this will help anyway, I can try to get a picture made this weekend...

--
Ron Ramirez
Ferdinand IN
#3

thanks i can use your picture all the paper capacitors are removed from the chaissis the filter capacitors are still there with no wires leading to them
#4

Okay, here's the photo...I warned you, it was modified to add a phono jack - and not only that, electrolytic capacitors were tacked in years ago.

[Image: http://www.philcoradio.com/ebay/44chas_sm.jpg]

Here's a link to a higher-resolution version - please let me know when you get it, as I am not going to leave this up on the server:

http://www.philcoradio.com/ebay/44chas.jpg

I hope it helps in some way.

--
Ron Ramirez
Ferdinand IN
#5

thanks i made a copy of it and stored it in my computer. it looks pretty good.
#6

If you still need a good pic of a virgin 44 chassis, I just found mine. Email me at "lawnweeds100" at Yahoo.com.

Pete AI2V




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM

[-]
Who's Online
There are currently no members online.

>