Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Wood grain on model 70
#16

Showing a second page, but when I click for it..........Nothing!

tractorforum.com *** I reserve the right to be wrong
#17

I remember some knock down drag out arguments about this on the barking dog forum. One character on the ARF, no matter how many times it was explained to him, could not wrap his head around the idea that the arch was veneered with the grain running horizontal on some cabinets and vertically on others. He insisted that every set with the grain running vertically over the arch was reveneered, it was wrong, and claimed that everyone who thought otherwise was an idiot. Even after we linked him to numerous pictures off all original cabinets with the grain running both horizontally and vertically he still insisted that vertical was wrong. As someone once said, never argue with an idiot, they will bring you down to their level and win because they have more experience.
Regards
Arran
#18

Oh yes, I remember that one. I finally backed away and let it goIcon_crazy

Steve

M R Radios   C M Tubes
#19

Quote:Okay Bill or anybody for that matter..... Which of these http://www.ebay.com/sch/i.html?_trksid=p...x&_sacat=0 in the Briwax lineup is going to be the best?
I have an old can of the "dark brown" that works pretty well.

Other "treatments" I've used with success over the years have been Howard's Restor-a-Finish or Old English (dark). Apply liberally, wipe off, let the set dry a day or two and follow up with some nice (wood) paste wax. I lean toward the Minwax brand because they have a version that is tinted brown. It doesn't really color the wood, but it isn't as noticeable if some traces are left behind in cracks and crevices.

Go ahead and order some Briwax, it doesn't get talked about as much as Howard's, but it deserves a place in your arsenal. One area where it really shines is on Tolex covered items. I had an extra carrying case for a Pilot 3" t.v. that had a pretty beat looking dark brown Tolex covering. One quick application of the Briwax colored in the small missing areas and made that case look almost new. Since the formula has changed I'd better order a can of the old stuff before it disappears like the original Brasso did.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM

[-]
Who's Online
There are currently 2769 online users. [Complete List]
» 3 Member(s) | 2766 Guest(s)
AvatarAvatarAvatar

>