Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 19 Cathedral Shadow Meter
#1

Hi all,

Would any of you know if the shadow meter that is standard on a Model 19 cathedral chassis is the same as let's say other models? I've some other chassis that contain shadow meters, and the chassis I am dealing with it now has provisions for a meter, BUT the meter is missing.

Thanks for your advice and assistance.

73 de,

Gary/N9VU
#2

Gary,

Philco designed three versions that I know of (see my Service Tips on S. Meters). I believe the type you are looking for would be the early version with the long rectangular box. The Service Tip will give you other models of that early period that would have used the same type you could scavenge or look for junkers.
#3

Chuck Schwark Wrote:Gary,

Philco designed three versions that I know of (see my Service Tips on S. Meters). I believe the type you are looking for would be the early version with the long rectangular box. The Service Tip will give you other models of that early period that would have used the same type you could scavenge or look for junkers.

I'll give the site a look. Thanks Chuck.

73 de,

Gary/N9VU




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 843 online users. [Complete List]
» 2 Member(s) | 841 Guest(s)
AvatarAvatar

>