Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

640 and 650 band indicator masks
#1

Do the 4-band 640 and 650 Philcos have a dial mask that moves behind the dial to show which band it is on? It doesn't seem to be present in two 650's and one 640 in my collection; oddly enough, the 3-band 645 DOES have this mask, changing the brilliance of the indicating "Y".

I just bought a junker 650 with the idea of transplanting this mask- but the junker doesn't have one either. At least I now have a cabinet for the 640 chassis that's been collecting dust.

Pete AI2V
#2

Just went downstairs and checked my 650B plus a 650RX chassis I have in the archives; neither have the shadow mask.

Apparently this idea was not fully implemented throughout most of the Philco lineup until mid-season 1936. Models 116 and 660 had shadow masks in the first half of the season, while Models 650, 643, 640, 630, 623, 620, 611 & 610 did not.

--
Ron Ramirez
Ferdinand IN
#3

Thanks, Ron.

I won't be looking for something that doesn't exist any more.

Pete AI2V




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 862 online users. [Complete List]
» 1 Member(s) | 861 Guest(s)
Avatar

>