Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Starting on Philco 111 More Questions & Pics
#61

My CRS was at it again. (Can't remember s__t.)

Agree about location of trouble. Can't hurt to replace the mica caps with modern replacements, they have been known to go bad.
#62

Thanks TA, have the label posted now for the back of the shield. Still waiting to see if someone can post a picture of the top label with the tube layout. Even if cruddy, it can probably be cleaned up and posted for posterity on Ron's site. Come on gang, someone has to have a label they can shoot a picture of.
Regards, Jerry

PS: I have receive the new mica caps associated with the area. Waiting to receive the rewind of the detector coil and first see if that helps anything.

A friend in need is a pest!  Bill Slee ca 1970.
#63

Jerry,

Apparently my 111 is missing the shield that you mention. I take it that it goes across the back shielding the 224s kind of like in a 70 or 90? Do you have a picture?

Here is a picture of mine - sorry, cell phone does not know what focus means. It does work great though with just a 4 ft chunk of wire for an antenna. It is a keeper.


   

   
#64

Nice looking finish and nice radio Phlog. Yes, you are missing the tube shield. Take a look at page 2 of this thread and you will see what it looks like. Surprised you don't get a little oscillation from the tubes interacting. Same shield as on my 112 probably other early Philcos as well. If you find one, I have the label for the back of it, looking now for one for the top.
Take care, Jerry

PS: an addition, Phlog, what a lovely set of globe tubes. Shows nice without the shield. Dang pretty looking.

A friend in need is a pest!  Bill Slee ca 1970.
#65

Finishing touches for this long thread. Received the rewound detector coil from Ron yesterday and installed it. Wow, this radio really does rock the garage. All the "lightning" sounds have disappeared, the coil must have been arcing. Just a alignment to check but last night I was receiving San Francisco and LA clearly. Maybe I should't even play with alignment! Final picture to be posted when I get the cabinet finished and the radio installed.
Regards, Jerry

A friend in need is a pest!  Bill Slee ca 1970.
#66

Jerry

With Debbie's help - well, actually, she's doing most of this job with my help - we've started separating all of my Philco paper by year and will be filing it accordingly in a large file cabinet I have acquired for the purpose.

Going through my stuff, I discovered that the tube layout sticker I thought I had for a 111/112 was, instead, for a 96.

Just letting you know I did not forget about the 111/112 tube layout sticker...but as it turns out, I don't have one after all.

--
Ron Ramirez
Ferdinand IN
#67

Ron, I can't thank you enough. Thanks Debbie for looking. I do believe this will be the most rare of the philco graphic. I can't believe you were still looking! It's been a while and I have given up on it. Thanks so much for keeping my need in mind.
Jerry.

A friend in need is a pest!  Bill Slee ca 1970.
#68

Not certain if I ever posted the finished pictures of my 111 but thought I would slap them in here. This is my phavorite Philco. Mostly due to the introduction of superhet and being the kissing cousin of my 112 in another room. Just love the look of it and the performance and sound. All but the top is absolutely original. The top had to be taken down due to some really bad water stains through the finish. Possibly a little light in color from the original but I love the looks and history of this radio.
Jerry

[Image: http://i303.photobucket.com/albums/nn129...001-13.jpg]

[Image: http://i303.photobucket.com/albums/nn129...002-10.jpg]

Thanks for all your help.

A friend in need is a pest!  Bill Slee ca 1970.




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco P45-6365 Universal Transformer Instruction Manual
Can anyone guide me to where this may be found?GRG — 03:00 PM
54C Complete Teardown/Rebuild
I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM
HiFi (Chifi) tube amp build - but my own design.
It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM
Philco 71 Code 125
Hello,  I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated.dconant — 07:57 AM
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM

[-]
Who's Online
There are currently 2004 online users. [Complete List]
» 2 Member(s) | 2002 Guest(s)
AvatarAvatar

>