Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Circa '32 Crosley 148 book radio & RCA 6T2 tombstone
#1

OK, it pays to be a user of facebook. More importantly, it pays to "like/become friends" with all the local flea market/antiques dealers who post pictures on facebook.

Early last week, one of the local antique malls posted the following Crosley "book" radio on their facebook page. It seems like the really good ones always turn up at the end of the month, when my funds are extremely limited; but, I sent the owner a message and asked how much and she said $70. I've done business with her before and I asked her to hold it for me; which, she agreed to do. I ended up putting $20 down for her to put it on lay-a-way for me and I picked it up today. It turns out to be a model 148; and, as can be seen, something made a nest in it and someone replaced the original electrodynamic speaker with a PM speaker. Eventually, I'd like to find an original type speaker for the radio. The cabinet needs a good cleaning and some of the covering needs to be reglued; but, I think it's restorable and I think I did good for $70.

[Image: http://i538.photobucket.com/albums/ff341...205e1b.jpg]

[Image: http://i538.photobucket.com/albums/ff341...1a196a.jpg]

[Image: http://i538.photobucket.com/albums/ff341...d37adb.jpg]

[Image: http://i538.photobucket.com/albums/ff341...27e2c7.jpg]

[Image: http://i538.photobucket.com/albums/ff341...7e80bd.jpg]

[Image: http://i538.photobucket.com/albums/ff341...647782.jpg]

The second radio, a '36 RCA 6T2 tombstone, was the result of another local resell shop posting it on their facebook page. I asked about the price, was told that it was $60, and I picked it up Friday. This radio looks very restorable, with some minor veneer damage along the bottom. The chassis looks to have been worked on very little and is not a hack job mess like so many of them are. This RCA looks to be very well made and I'm sure it will perform well.

In my area, radios such as these rarely turn up; and, when they do, the owners think they are sitting on a goldmine. Most of what I find in my area is stuff from the '40's and later.

[Image: http://i538.photobucket.com/albums/ff341...c65460.jpg]

[Image: http://i538.photobucket.com/albums/ff341...aab476.jpg]

[Image: http://i538.photobucket.com/albums/ff341...74b3bf.jpg]

[Image: http://i538.photobucket.com/albums/ff341...4679a6.jpg]
#2

The RCA will be a player!

Paul

Tubetalk1
#3

At least it looks like they used a real choke in that Crosley, instead of a resistor.
#4

Two very nice finds and a good tip to boot. I've started doing the same, liking different resale shops in my area on Facebook as I find them. No jewels yet, but it can happen.

No matter where you go, there you are.
#5

The whole Facebook thing wouldn't work around here, most of the junk/antique dealers seem more interesting in collecting then selling, and the ones that are interested in selling don't bother with the internet at all. The last thing I saw for sale in terms of novelty radios was a Guild Country Bell for $70, it's in so so condition, and I wouldn't pay anywhere near that for it given how common they are, neither will anyone else since they still have it.
As I mentioned on you tube at least whoever replaced the speaker had enough of a mind to use a proper choke instead of a large power resistor, some people think they can use a pi filter in a 10 tube console with push pull outputs. You can get away with that in a five tube set but the current load gets higher with tube count and so does the voltage drop.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Electrolytic restuffing/internals
I don’t have a vise so I had to hold it in my hand. Not optimal but covered up by the hvac tape in the end. I have a few...bridkarl — 11:52 PM
Electrolytic restuffing/internals
Bridkarl A question. For a hacksaw the cut looks a little...jagged. Why?morzh — 11:45 PM
The list of my radio & TV collection!
As usual, an interesting post from you, Peter. This seems to be similar to the RCA 3-BX-671 and the Zenith Transoceanic...MrFixr55 — 11:41 PM
The list of my radio & TV collection!
Hello Peter, Thank you for sharing your new video and looks like your weather is nice their too. it was like 25 Cel...radiorich — 11:05 PM
Electrolytic restuffing/internals
hello bridkarl, I will post some better photos ! Sincerely Richardradiorich — 10:14 PM
Electrolytic restuffing/internals
I just taped the two pieces of the cap together, but I can see your method is better. I just held the lead in with solde...bridkarl — 08:18 PM
Electrolytic restuffing/internals
hello bridkarl, Well done ! Here is a Photo of the base of Philco capacitor that I cut open you can see how I glued th...radiorich — 08:14 PM
philco predicta
Hi CGL18, Here is a link for the schematic from the Early television Foundation: WARNING!! One side of the Chassis i...MrFixr55 — 08:09 PM
The list of my radio & TV collection!
Peter; I like Canadian General Electric sets, whilst the model numbers are often the same as their U.S General Electr...Arran — 05:44 PM
Electrolytic restuffing/internals
Did as suggested. Cut can with hacksaw, removed internals, attached new 8mf cap - with ample use of cardboard and elec...bridkarl — 03:36 PM

[-]
Who's Online
There are currently no members online.

>