Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What's missing from this cabinet?
#1

I stumbled on this 39-6 searching eBay this morning but something about doesn't look right to me. Should there be a trim piece or something on the dial cutout?

http://cgi.ebay.com/140198174567

(edited by site admin to eliminate scrolling to the right)
#2

The glass is missing, along with the knobs and grille cloth.

Either the case was striped or it's the wrong case for the chassis.

Here is a 39-6 from Radio Attic gallery: http://radioatticarchives.com/radio.php?radio=2004
#3

Thanks for the link. In the gallery picture it looks like maybe the glass glazing (?) that is darker brown that seems to 'finish' off the dial cutout. Doesn't look like the auction radio has the different veneer inlays either or just a bad refinish job. Wonder if that model came in a painted version and this is the plain wood underneath after stripping...
#4

Tony

Take a good look at the photos showing the back of the cabinet. Clearly, the cabinet was originally painted ivory...and later stripped.

The ivory painted 39-6 cabinets should have a metal bezel and dial glass. Walnut 39-6 models only have a plastic dial cover, no metal bezel. So Chuck is right, the dial glass and bezel are missing from this set...

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 859 online users. [Complete List]
» 1 Member(s) | 858 Guest(s)
Avatar

>