Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

39-55 cabinet light question
#1

I noticed on my 39-55 cabinet when I bought it there were two holes in the front. One, of course was for the knob for the door over the controls. At first I was disappointed as I thought the knob was lost but found it wedged between one of the front pillars and the grille clothIcon_clap! I didn't know what the second hole in the cabinet was for until I removed the chassis and found out there was an indicator lamp mounted in there. i suppose it was for letting the user know if the power was on with the cover closed. Anyway, my question is, is there some sort of lens cover that mounted over the hole? I can't tell from the pictures in the gallery. If there is one, does anyone have any pictures of what it looks like? Thanks!
Kevin
#2

I use to have those remote controlled radios and it did have a light there it was a different model don't remember witch one wish I would have kept it.
#3

Hi Kevin,

This YouTube video shows a 39-116RX with a working mystery control. The red light you refer to is shown working fairly clearly:

http://www.youtube.com/watch?v=siWbRMSYBcc

Greg V.
West Bend, WI
Member WARCI.org
#4

I think that there was a small plastic jewel lens mounted in that hole. I don't think that they were anything that fancy just a plain red plastic jewel. I had a G.E radio/phono combination unit from the early 40s and it had a similar sort of lens mounted in the skirt bellow the speaker grille, it was kind of necessary since the control panel was hidden behind a door.
Regards
Arran
#5

Thanks Greg for the You Tube link! It was neat seeing how the mystery control sets work! I guess I'm going to have to look for that lens.
Kevin




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM
philco predicta
Hi CGL18, First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens: ...MrFixr55 — 08:22 AM
Another amp build - here I go again!
Sweet! I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM
PT-6 finished!!
Hi Gang, Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM

[-]
Who's Online
There are currently 1103 online users. [Complete List]
» 1 Member(s) | 1102 Guest(s)
Avatar

>