Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1948 Philco album length phonograph
#16

I have paid 1$ plus shipping trough the canadian borders - 99 cents initial bid on an AS-IS ebay auction. Turns out everything works but the CD player; i've rerouted it to an aux-in jack for MP3 players.

NostalgiaRadioTime, that connector is almost identical to what was between the record-changer and radio chassis on my 47-1230 - I guess they were pretty much standard already. It is the female connector that I found more puzzling.

Here's a picture of mine.


Attached Files Image(s)
   

-Mars
#17

Yes, I have the same set up on my 47-1230. My 1940 Coronado has an RCA jack built into the chassis from factory new, meant for use with an external phonograph. In fact, there is even a phono button on the dial next to the station pre-sets, so it was the perfect set up for use with this M-15 phonograph.

These connectors were developed in the late 1930's by (who else?) RCA, and were quickly adopted for use by other brands as well. Apparently not Philco, however, until after the war, but I'm probably wrong on this. Perhaps the Beam-of-Light phonographs used them in the early 40's?

Greg V.
West Bend, WI
Member WARCI.org
#18

No, the beam of light phonographs used a connector and socket that was proprietary to Philco, they did not use RCA jacks. Some Canadian market Philco models did use RCA jacks and sockets but not the Canadian versions of U.S models.
Philco had a adversarial relationship with RCA, much more so on the U.S side, that was why you didn't see Magic Eyes or metal tubes in Philco radios as original equipment. Philco wasn't about to pay royalties to RCA unless they absolutely had to, so the last thing they would do is use an RCA phono jack. Why they didn't come up with their own alternative like they did with other things only they could answer. But it wasn't just with RCA patents they had a similar attitude when it came to Armstrong's FM patents, that was why they came out with some funky detector circuits using things like the FM1000 and XXFM tubes.
The Bing Crosby I have, it's called a model 76 in Canada as opposed to a 46-1201 like in the U.S, has everything hard wired, no plugs of any sort. This was rather short sighted as you need to desolder those wires, along with those for the loop antenna, out of the cabinet just to remove the radio chassis. As a result I think that I may have been the first person to pull the chassis out since the set left the factory in 1946-47.
Regards
Arran
#19

Well....Philco 80 does not have a speaker plug. Guess how convenient that was to remove.
And it is understandable - connectors are expensive.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philcorepairbench.com - shadow-meter
Hi, Try here Philco Service Hints & Tips, Number 1 It's from the web archive (Way Back Machine).Keith — 10:17 AM
PT-6 finished!!
Hi Arran,  Yes, you are correct, the "nominal" voltage for these Loctal tubes was the same 6.3 or 12.6 V as...MrFixr55 — 07:48 AM
PT-6 finished!!
Actually the Loctal tube series, with number beginning with "14" are 12.6 volt tubes, at 150 ma, I'm not sure ...Arran — 02:14 AM
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM

[-]
Who's Online
There are currently 786 online users. [Complete List]
» 2 Member(s) | 784 Guest(s)
AvatarAvatar

>