Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help identifying this phonograph? E1764 or E1765 from 1957?
#1

We've found this in my wife's, Grandmothers attic after she passed. It looks to be in very good condition, so we're trying to decide if we should keep it or sell it. Part of that will be determining what it actually is Icon_smile

This is a picture that my wife just sent me to do some research on. Unfortunately she didn't look for a model number tag anywhere, but I'll do that when I get over there too. In the meantime, I thought maybe the experts could help out Icon_smile

If anyone can give an estimated value of something like this, that would be great too.


Attached Files Image(s)
   
#2

As a general observation of mine, sets of this era... how to put it politely? I suspect its sentimental value far surpasses the cash value you could get out of it under just about any circumstance. They aren't quite old enough to be considered "antique" yet, but if you find the right hipster...
#3

Ha, no sentimental value with it all, which is why I'm here asking about it Icon_smile

We may keep it an re-purpose the cabinet, I'm going to plug it in and see if it works tomorrow.
#4

HHHHHHHHIcon_exclaim That's, like,uh,un-jivey, man... another one, like,uh, headed down to the lower depths in the pit of despair. Man. Daddy-o. That's cruel... Icon_think Sorry. Couldn't resist. Icon_mrgreen But that does look to be in pristine shape (from the blurry photo)
#5

Does it have a radio in it as well or just the phonograph?
Regards
Arran
#6

J2K Wrote:I'm going to plug it in and see if it works tomorrow.

[Image: http://i326.photobucket.com/albums/k420/...g~original]

This is the worst thing you can do to a piece of vintage electronic equipment, because it is a big gamble. It may work...it may smoke...it may trip a breaker. Or it could even catch on fire.

Vintage electronics should be thoroughly checked by someone who knows what to look for (bad electrolytic capacitors which should always be replaced before applying power, any tar or wax seeping from power transformers) before power is applied.

http://www.philcoradio.com/tech/plugin.htm
http://www.antiqueradio.org/powerup.htm

But if you're determined to really plug it in and see what happens...all I can do is quote Clint Eastwood:

...You've gotta ask yourself a question. Do I feel lucky? ...Well, do ya, punk?

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philcorepairbench.com - shadow-meter
Hi, Try here Philco Service Hints & Tips, Number 1 It's from the web archive (Way Back Machine).Keith — 10:17 AM
PT-6 finished!!
Hi Arran,  Yes, you are correct, the "nominal" voltage for these Loctal tubes was the same 6.3 or 12.6 V as...MrFixr55 — 07:48 AM
PT-6 finished!!
Actually the Loctal tube series, with number beginning with "14" are 12.6 volt tubes, at 150 ma, I'm not sure ...Arran — 02:14 AM
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM

[-]
Who's Online
There are currently 798 online users. [Complete List]
» 2 Member(s) | 796 Guest(s)
AvatarAvatar

>