Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

2 new Philcos for the flock
#1

38-8 $5
[Image: http://i191.photobucket.com/albums/z309/...7ea0c3.jpg]

Lowboy with tapestry $12............45s are gone
[Image: http://i191.photobucket.com/albums/z309/...24ade3.jpg]
#2

Nice find DK Icon_thumbup

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

What great finds DK, could only happen out on that other coast area. Not a chance around here.
Jerry

A friend in need is a pest!  Bill Slee ca 1970.
#4

Very Nice Radios... Icon_clap
#5

The 45s are gone from the second console? Not 71As?
Regards
Arran
#6

Quote:Not 71As?

Hmm.......don't know, just assumed. Which schematic will I want?
#7

How many tubes does it appear to have? Does it have a metal box at the back of the chassis behind the tuning cap? The gallery say that there were four different chassis offered with that cabinet, a 40, a 76, an 87, and a 95. The 95 had type #45s, and I think the 87 did too, not sure about the 40 and the 76 though.
Regards
Arran
#8

Quote:Does it have a metal box at the back of the chassis behind the tuning cap?

No.....And it has 45s, and only one is missing! What a great auction. It was some guy's collection of hundreds of radios, parts, test equipment, etc. The Mohawk One Dial was $25 with six good 01As. If you wanted parts sets, you could have filled up a pick-up truck for a few hundred dollars. There must have been 30 Philco cathedrals from great to falling apart; but the tubes were in all of them along with the knobs.
#9

Be careful with that because both #45s and 71As are four pin tubes, and in 1929 Philco used both depending on what chassis you had. I remember that there was a Philco 20 in a local antique shop where someone had fitted a pair of #45s in place of the 71As, they were both burned out needless to say since a 71A has a 5 volt filament.
Regards
Arran
#10

I could see tube number stamped on the chassis in front of the socket (with the dirt rubbed away and a flashlight in my mouth.)
#11

Hi All;
DK, I hope the end of the flashlight is cherry flavored..
THANK YOU Marty




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM
philco predicta
Hi CGL18, First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens: ...MrFixr55 — 08:22 AM
Another amp build - here I go again!
Sweet! I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM
PT-6 finished!!
Hi Gang, Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM

[-]
Who's Online
There are currently no members online.

>