Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

41-608 bol
#1

hey guys
i purchased 2 sales listed as philco speakers 1 was a steal other inflated by seller but still cheep.
question is i belive they are mic`s as i have seen them before . 1 has a wire that goes to black box at top in rear of cabnet i opened it up looks like speaker to me ??


Attached Files Image(s)
   
#2

I bet it is intended as a mic but is just a small speaker. The low Z is boosted by the box which is an input transformer.
#3

Almost all passive electrical machinery is reciprocal.
#4

Yes. I seem to recall (in the dark, distant past), during "experiments", I was able to use a speaker as kind of a microphone. Icon_crazy Odd, but semi-effective. Icon_wtf Could be a hybrid?
#5

Dunno about that, but a small PM speaker makes a very good microphone, just use an output transformer in reverse. Done all the times in old time intercoms. In fact they sometimes used 45 ohm PM speakers to minimize losses in wiring from remotes to masters. Dunno about modern ones though.
#6

thanks guys
i only seen one with the radio for sale but was way to expencive for me
i see them on ebay but no cords as this one has cord i see where it goes .it dosen`t say any about it on my schamtic`s
now all i need is plater to motor cupler and it is complete
amazing a speaker can be a mic too!!
sam




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM
philco predicta
Hi CGL18, First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens: ...MrFixr55 — 08:22 AM
Another amp build - here I go again!
Sweet! I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM
PT-6 finished!!
Hi Gang, Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM

[-]
Who's Online
There are currently no members online.

>