Maggy Concert Grand worth restoring??
Posts: 18
Threads: 5
Joined: Jun 2012
City: Texas
Just picked up a complete unit from about 1959 missing only the remote transmitter. Has mostly original Maggy tubes. Radio chassis works great. Only thing done to it was the filter cap replaced earlier by someone else. Tuning dial pointer motor works just fines and reverses. Motor on volume pot has open coil. I would like to find a replacement, but without the remote transmitter it would do no good. Would also like to find a replacement for the transmitter. These are probably fairly scarce, although with the way the amps are usually parted out, maybe there will be receiver chassis and transmitter sitting around collecting dust somewhere?? I hope!!
I have not yet fired up the two 12 tube power amps, but do not anticipate any problems. Will, of course, do so slowly, etc. Any comments welcome from others who may have had previous experience with these.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
How about some pictures Harry? Cabinet and love to see those power amps.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 18
Threads: 5
Joined: Jun 2012
City: Texas
Yes, I suppose pictures would help. I'll see what I can do. At this point, everything is out of cabinet, but easy to photo separately. Is Sedona near Cottonwood? If so, I think I went thru there a couple of years ago visiting friends in Cottonwood.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
Yes Harry, Sedona is about 9 miles from Cottonwood.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 141
Threads: 13
Joined: Sep 2011
City: moline, il
Some consider the Maggie concert grande the holy grail of that brand.
I think there are about 40 tubes in one of these and 5(?) separate chassis inside. I have only seen the back side in 1 photo ever, so please yes, post some photos for us to drool over. If you have trouble posting the pix, email them to Ron and he can help get them up on here
Posts: 18
Threads: 5
Joined: Jun 2012
City: Texas
Will do, for sure. I'm working on the two amps today to recap and replace any out of range resistors, etc. Yes, there are five separate chassis. 1 - Radio receiver; 2 - Power supply for radio receiver; 3- Phantom remote receiver (has it's own power supply with separate tranny); 4 & 5 - the two 12 tube amps, each with 8 6V6's, 2 5U4's, and 2 12AX7's. Needless to say, this thing weighs much, even without the two power amps. All solid wood - none of that fake stuff. The only thing resembling plywood are the covers for the speaker enclosures at the rear end.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
I guess they really do things in a big way out there in Texas Harry! We are waiting for some pictures to drool over as Bruce indicated.
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Harry, could you post some photos of your Concert Grand here?
I was never into Magnavox AT ALL until I noticed Ron and others referring to them here in the Phorum. When I found one last summer, for very little, in nearby Durham, I went ahead and got it.
Mine is (I think) a 1947 Regency Symphony in Blond finish. It is missing the CR 189 FM tuner, so it is "only" a 13 tube set vice a 21 tube set.
Two speakers/20 watts output. Broadcast, SW, and a decent record player. Magnavox are ANOTHER thing Ron is responsible for getting me into.
I could, I think, verrry easily get into a Concert Grand.
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
I too have a Magnavox console, one of the first radios I worked on, got it for free. Lot's of problems with the FM, mostly me but some subtle problems. It is really a nice sounding unit. I would give it away to someone just to make room for something new. The Concert Grand has to be the cosmic radio from Magnavox. At my age, I wouldn't have the time left or the brain left to go through that but it sure as H**L would be fun trying. Waiting for pictures. To heck with the Zenith Strat, this is a potent radio!
Jerry
A friend in need is a pest! Bill Slee ca 1970.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
+1, Jerry!!!
Lately I have been interested more in a set's performance vice it's look. The Magnavox I have is definitely a performer!!
FYI: STILL LOVE MY PHILCOS
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Philco P45-6365 Universal Transformer Instruction Manual
|
| Can anyone guide me to where this may be found?GRG — 03:00 PM |
|
54C Complete Teardown/Rebuild
|
| I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM |
|
Philco 71 Code 125
|
| Hello,
I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM |
|
Stromberg Carlson 1500 Squeal
|
| And life just keeps getting more complicated.dconant — 07:57 AM |
|
54C Complete Teardown/Rebuild
|
| Hello Roy,
here is this one
sincerely Richardradiorich — 12:45 AM |
|
54C Complete Teardown/Rebuild
|
| Richard,
Had grabbed it already but thank you just the same. I find myself wanting to find some way to block out the...glyphmon — 12:03 AM |
|
54C Complete Teardown/Rebuild
|
| Hello roy,
here is a link to the schematic .
Sincerely Richardradiorich — 11:54 PM |
|
54C Complete Teardown/Rebuild
|
| Richard,
The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Did an alignment today which was interesting. IF alignment went great, almost all was already spot-on. Adjusting on th...glyphmon — 11:35 PM |
|
Who's Online
|
There are currently 1745 online users. [Complete List] » 1 Member(s) | 1744 Guest(s)
|
|
|
|

|