[raydog]

I have an open filter choke on my Philco 90. Where would be a place to get a new one if I need to go that route? I checked Mouser but I didn't see anything with the specs I need. Philco has it listed as p#4951... 4 Henries, 80ma and 150ohms. Not sure how close to these specs I need to be. For a used one, go to Oldradioparts.com?

Thanks, Don

[Radioroslyn]

Typically specs aren't real important. The inductance you can go higher but not lower same with the current. Resistance isn't very important. If you can stay within 100-150 ohms of original
GL
Terry

[morzh]

Mouser has some.

http://www.mouser.com/ProductDetail/Hamm...61EBX0Y%3d

4H 90 ma 108 Ohm


http://www.mouser.com/ProductDetail/Hamm...WG9NZbQ%3d

4H 225mA 65 Ohm

Use either one, the first is cheaper.