Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Is this a Philco 71?
#1

HI all,
I have a Philco 71H highboy, and the chassis in it is unmarked but in doing some re-capping I found inconsistancies with the Philco 71 schematics... I have a 71 code 125 cathedral and thats very different from this chassis.

The chassis has a lineup of 36's with a 44IF but this chassis is also fitted for a Tube shield, which is missing... were any 71's fitted for a tube shield? were any sets with a 36 or 44 tube lineup fitted for a tube shield?

Just not sure which model this chassis is really for.

Thanks

KEith
#2

Hi Keith

The majority of Philco 71 chassis (Code 121/221 and 123/223) have a single large tube shield on the left (when looking at the chassis from the back), like the late version of the Philco 70.

Towards the end of 71 production, Philco switched to individual cylindrical shields over the RF, Det-Osc and IF tubes.

Shadow meters were also added to Philco 71 sets sometime during production. I'm pretty sure that no code 121 or 221 model 71 sets had shadowmeters. I'm thinking these were added during production of code 123/223; and by code 125, a shadowmeter was standard.

--
Ron Ramirez
Ferdinand IN
#3

aha, Ok, this is a code 221 as I suspected, no shadowmeter. It might have the wrong tubes in it, it works well without the tube shield but Id like to find one. Ive had this set over 20 years now and im going thru it to make sure everything is right now that I have things like schematics that I didnt have 20 years ago!

Thanks.,

Keith
#4

Keep an eye on eBay those shields show up from time to time. There was someone making them but I haven't been able to find out who it was or where he was selling them.

-Keith
#5

Chuck Paci, cpaci1 at verizon dot net, makes the reproduction tube shields, and they are of excellent quality and include reproduction stickers on them. He puts them on eBay from time to time, and Mark Oppat resells Chuck's shields, but you can contact Chuck direct and he will be glad to sell one (or more) to you. Icon_smile

All 71 sets have the following tube lineup:

39/44 - RF amp
36 - Det-Osc
39/44 - IF amp
37 (connected as a diode) - 2nd Det.
39/44 - Audio Amp
42 - Audio Out
80 - Rectifier

--
Ron Ramirez
Ferdinand IN
#6

Mark had a few of the shields up at Kutztown.
Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM
philco predicta
Hi CGL18, First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens: ...MrFixr55 — 08:22 AM
Another amp build - here I go again!
Sweet! I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM
PT-6 finished!!
Hi Gang, Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM

[-]
Who's Online
There are currently no members online.

>