My Next Project - Butterfly Radio
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
I thought I would share my next restoration project. It's a sad little Philco Model 45 that needs quite a bit of help. Normally I would do the chassis first, but winter is approaching and I'm gonna knock out as many cabinets as I can this fall. Here it is..
As you can see, it has some old glue caked into the slots. Anyone got any ideas on how to get it off the wood?
One more thing... I don't create these threads to show you I am the forum expert on refinishing. Actually, it is the opposite.. I'm no expert at all. My goal is simply to encourage everyone to try their hand at repairing and refinishing cabinets. Hey, if a guy named Puhpow can get decent results, so can you!
The artist formerly known as Puhpow! 8)
(This post was last modified: 10-02-2013, 08:37 AM by Jamie.)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Now, I'd like to see how you replicate the louvers in the top plus the two raised bars in the top. (It looks like someone removed the original cabinet top and installed a plain piece of wood in its place.) Good luck!
--
Ron Ramirez
Ferdinand IN
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
ohh sounds like a challenge to me 
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
heheh.. it sure does!.. I've been asking myself those same questions. I'm trying to find good photos of a 45, so I can decide the next move.
The artist formerly known as Puhpow! 8)
Posts: 240
Threads: 27
Joined: Jun 2013
City: Boulder, Colorado
Hi All;
PuhPow, I want to Thank You for the picture, I at least now know what knobs my Radio would take..
THANK YOU Marty
Posts: 4,896
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
I agree with Ron, I think that is exactly what happened, the original top came off, or suffered some other damage, so someone put a piece of thin plywood in it's place. The original may have been laminated too but thicker, and it had a tongue to fit into the groove on each side, the grooves that have since broken away. That cabinet needs a little more help then some wood filler and lacquer can offer on short notice. I would work on something else first that doesn't need so much reconstructive surgery.
Regards
Arran
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Nahhh.. I'm not shy. The new top will be created this week. Stay tuned...
The artist formerly known as Puhpow! 8)
(This post was last modified: 10-05-2013, 10:26 AM by Jamie.)
Posts: 4,442
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Good luck kid! My 45L has a very nice tone to it. I hope your version looks good and sounds super when done. Keep us posted.
Regards,
paul
Tubetalk1
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Thanks Paul! .. I found some great photos of an original 45 on Ebay. A very good friend of mine has a woodworking setup in his basement... routers, lathes, you name it. He offered to help me make the new top. (Translated - he's gonna make it, and I'm gonna watch..8)) I've got my cabinet stripped and I'm taking it over there tomorrow. He's going to look at it and tell me what kind of wood to buy.
Tomorrow afternoon, I'll go buy the wood and any veneer required and then make the top on Thursday. So if all goes well, I should have some photos soon.
The artist formerly known as Puhpow! 8)
(This post was last modified: 10-05-2013, 07:58 PM by Jamie.)
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Yes! We have a top!  Today was a productive day. Of course the top still needs to be glued together, sanded and sealed... but it's coming along...
The artist formerly known as Puhpow! 8)
(This post was last modified: 10-06-2013, 04:33 PM by Jamie.)
Posts: 479
Threads: 73
Joined: Mar 2012
City: Riverside, CA
Posts: 2,573
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
hmm think puhpow is smuggling gold in his radios. top may be wood decal 
Posts: 240
Threads: 27
Joined: Jun 2013
City: Boulder, Colorado
Hi All;
PuhPow, Looks Great.. Did You maybe work for Philco in Your Younger years , Or just dream of Working for them ??
THANK YOU Marty
Posts: 761
Threads: 56
Joined: Jul 2013
City: Kentucky
Thanks guys! .. Murph, if it ever became work, I wouldn't want to do it.
This radio is still a long way from being finished. The top looks pretty good, but there are still some issues left to contend with..
The artist formerly known as Puhpow! 8)
Posts: 61
Threads: 2
Joined: Aug 2013
City: Renton, Wa
PuhPow--is that the original top--or did you make ? looks good
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
The list of my radio & TV collection!
|
| A little light Saturday positive about our hobby in our feed...
My new every Saturday video about antique radio equipme...RadioSvit — 02:12 PM |
|
Model 70 Cabinet Trim
|
| musar ,
Well if you have any more questions feel free to post away .
Sincerely Richardradiorich — 08:56 PM |
|
Model 70 Cabinet Trim
|
| Although I have not made any cabinets or cabinet parts for a couple of years, I still have some parts left over, includi...Steve Davis — 06:26 PM |
|
philcorepairbench.com - shadow-meter
|
| Thanks Ron.fenbach — 02:43 PM |
|
Model 70 Cabinet Trim
|
| Thank you, Gary. Before making my original post, I had clicked on "Steve Davis Cabinets" only to find that it...musar — 02:25 PM |
|
philco predicta
|
| Welcome to the Phorum, cgl18! I am not your resource for television repair, but lots of friendly help is available here...GarySP — 02:12 PM |
|
Model 70 Cabinet Trim
|
| Welcome to the Phorum, musar! You can send Steve Davis a private message (PM). The site is at the top of the Home page...GarySP — 02:09 PM |
|
Model 70 Cabinet Trim
|
| How do I contact him? The only contact information for him I could find when searching online was a telephone number th...musar — 10:38 AM |
|
philco predicta
|
| Hello, good afternoon, I would like to ask what the possible problem could be if I don't have an image on the screen. I ...cgl18 — 10:19 AM |
|
Philco model 38 code 121 not receiving signal.
|
| So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM |
|
Who's Online
|
There are currently 1006 online users. [Complete List]
» 1 Member(s) | 1005 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
