Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 41-315X
#31

looks great
#32

I'm posting hear as we had discussed the pilot lamp earlier. Today I took home a 39-116 with its remote...THIS one still had a lense in it...a clear, faceted lense. Everything with this set appear original....Not sure if I want to pop this out and use one of my red lenses that worked very well in my 42-400...Any thoughts?
#33

is the clear lens 3/8" or was the hole drilled out to accommodate a 1/2" common faceted lens? personally I'd have gone with a faceted glass lens if I could've found one that would fit in the existing hole. as far as I know, and ron demonstrated, these usually came with cheapo plastic lens.

if it looks good with the faceted clear, why not try using a colored bulb?

http://www.pinballlife.com/index.php?p=c...ent=2&pg=1
#34

funny.. I just went back and realized there was all sorts of activity on this thread when I running back and forth from Texas to California (family issues). that radio looks amazing! looking at the escutcheon, you have a much steadier hand than I do. the lines look amazing!




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Electrolytic restuffing/internals
Thanks. I think I try to cut this as suggested. I don’t have a lathe, but I do have a tap and die set. I am going to see...bridkarl — 04:46 PM
Another amp build - here I go again!
Hey all! Well, I guess that with what I learned from my last build, it's time to move up the ladder another rung and tak...TV MAN — 04:38 PM
Electrolytic restuffing/internals
There are various ways to handle this, one is to cut near just above that rolled in area is near the bottom, using the r...Arran — 04:36 PM
philco predicta
If you have a television signal generator (a must-have for TV repair) and an oscilloscope (the same), then this problem ...RadioSvit — 04:23 PM
HiFi (Chifi) tube amp build - but my own design.
Thanks Rod for the offer but I don't think those would work. There's some differences in the sizing and mounting holes b...TV MAN — 03:13 PM
philco predicta
Bob Anderson (Bandersontv) on Youtube would be the go-to guy on these. Lots of good videos. I don't know what model you ...TV MAN — 03:02 PM
Electrolytic restuffing/internals
I have an issue on a non-Philco radio which I expect to run into on a whole set of Philcos and others. I have an 8mf ...bridkarl — 01:17 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. I thought about it and decided to put it up in the arch support. I was looking at the chassis and didn't ...Stormlord5500 — 06:24 AM
Philco model 38 code 121 not receiving signal.
Congrats on your success Stormlord. My rough guess is that since both the 15 and the 1A6 are supposed to be shielded, I...MrFixr55 — 10:04 PM
The list of my radio & TV collection!
A little light Saturday positive about our hobby in our feed... My new every Saturday video about antique radio equipme...RadioSvit — 02:12 PM

[-]
Who's Online
There are currently 679 online users. [Complete List]
» 2 Member(s) | 677 Guest(s)
AvatarAvatar

>