Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Did I just Find Original 20 / 70 Grille Cloth?
#1

    I did a buy out last week of an deceased radio repairer, Many items and boxes to go thru !
I came across this ! There appears to be enough for 6 more tombstone or Cathedral radios, was enough for maybe 8 but some was cut out.
There was an invoice from 1974 in with it?
What do you guys think?
Rock


Attached Files Image(s)
   
#2

Looks familiar

Save me one for my 570 clock. The stuff on it now looks like poop.

Nice!
#3

It's the correct pattern for 21, 70, 90, 71, 91, 19, older 89, and more...(not 20 though)...

But no one was reproducing grille cloth in 1974. That's the year I started collecting. As I recall, no one was reproducing anything yet at that time.

--
Ron Ramirez
Ferdinand IN
#4

Back then nobody cared any old tablecloth would do.
Terry
#5

Nice find! Probably some other treasures in there as well Icon_clap
#6

Nice find let us know what else you come across thats interesting.
#7

This is my question, answered nicely! Can I get some of it for my late 89B from 1933?
#8

Here is a bit of blasphemy for you - Ron turn your head.

There were 3 patterns sold by GCH with that pattern. The only difference was color. They were Patterns 1. 2 and 24. Pattern 24 was described as a "weathered look" of pattern 2, but could be better described as a reddish brown version. This pattern was also used on some of the big, late 30s Zenith consoles.

If what you have is that pattern, I would be better to hold on to it intact, since these console take a larger piece. A GC similar to pattern 1 is being reproduced currently.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#9

Russ, who is GCH?....oh, probably GrilleCloth Headquarters?
#10

Sorry, yes it is.

By the way, I saved pictures of all of the old patterns, if they are ever needed.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#11

Phlogiston Wrote:There were 3 patterns sold by GCH with that pattern.

Yes, I know that - I helped John develop many of those patterns, actually, by providing samples and critiquing the new products as they developed. (I didn't help with the 70/90 pattern, but I did help with some of the other Philco patterns he used to offer.)

If you're counting #24 (and I never did since it was not authentic), there were four variants, actually.

#1 (whiskey)
#2 (copper)
Unknown number (a combination of whiskey and copper)
#24 "weathered look"

--
Ron Ramirez
Ferdinand IN
#12

Agreed Ron, but I don't know what the 4th pattern was. Anyway the poorly colored pattern 24 is great for Zeniths, and if anybody comes by some of this nasty stuff, I would be happy to have it. It also was a perfect match for some 30s Crosleys and other makes.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#13

I looked at a couple different versions of John's old site last night via the Wayback Machine, and did not see the combination whiskey/copper variation. Maybe that variation was sold by Michael Katz instead of John Okolowicz? Anyway, I not only remember the cloth, I had some sets pass through my possession that had that cloth installed.

Some Philco 89s and a few other 1933 Philcos did use a factory copper version of that cloth, so it was good that John offered both.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread:
[-]
Recent Posts
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM

[-]
Who's Online
There are currently 2731 online users. [Complete List]
» 3 Member(s) | 2728 Guest(s)
AvatarAvatarAvatar

>