If You Need To Learn About Radio Repair..
Posts: 16,581
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I have heard it is easy today - no Morse code is required. 
I still think a ham should know Morse. I am not even a ham and I know it.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Thanks, Dave. It is something I have always had an interest in, but actually getting on the air for me is a daunting thought, although I NEVER had a problem sending traffic on military sets.
Posts: 15
Threads: 1
Joined: Jan 2014
City: Fort Washington, MD
Yeah, it is a bit scary to key up for the first time. I monitored the nets for a couple of years before I bit the bullet. It's quite a bit different than my old CB days. More professional and serious but not in a bad way. If you listen to CB nowadays it'll make you cringe!
One of the primary reasons I got the ticket was for emergency communications. I'm part of an emergency preparedness committee and I figured I better practice what I preach! The free radio was nice but I had already found a nice Yaesu 897D to play with, just couldn't play with it the way I wanted to!
One little secret the Hams and the FCC don't like to talk about is that in a true emergency, when no other form of communication is available, you don't need a license to use the ham bands. At least that's how I read it. But you didn't hear it from me....
Posts: 16,581
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
In true emergency no licences needed whatsoever, period.
Not just with communications.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Am looking forward to the day I get my licence and start transmitting.
I have gotten nothing but great support from current hams. That is a great way to represent the hobby!!
Posts: 16,581
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Well, getting back to learning....
How'bout all of those who want to learn and a few of us who have experience get for a couple of days to some place East Coast, and have a course of repairing radios.
No,no, I understand it is complicated.  but wouldn't it be cool?
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yes, I think that would be a great idea!!
But instead of doing it on the east coast, lets do it ......
In RON'S NEW MID-CENTURY HOUSE !!!!!!
Can you think of a BETTER WAY to christen a NEW HOME????
We could set up card tables in EVERY ROOM and stay up WAY PAST OUR BED-TIME fixing radios, telling stories, ......
And THEN, when the MOON is HIGH UP IN THE SKY, we could..............
START A BONFIRE AND BURN BOOKS!!!!!!
Gosh, I'm just getting so excited about this, I may have to go outside and practice marching into Poland, oops, I mean go for a little hike!
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
But seriously, Mike, it is a good idea!
Posts: 16,581
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I know it is.
And we could combine it with cabinet works 101.
I certainly could benefit from it.
As for marching on Poland, Ukraine right now could use you marching on it. And even you end up just drinking one beer, theuy could use all proceeds they can get.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
I would bring a truckload of empty bottles, I understand they are breaking quite a few of them filled with gas and a rag.
Posts: 16,581
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
No, bring beer in them, then it is of a better usefulness.
Posts: 467
Threads: 31
Joined: Sep 2009
City: Lapeer
State, Province, Country: MI
Nothing against Ron's house or Indiana, but wouldn't it be a bit warmer (and less war-like) in the Caymans, or maybe roost at exrays place in Puerto Rico? We could stop by Ron's and pick him up.
Joe
Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
Posts: 16,581
Threads: 574
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
A cheap resort is fine, but things being equal I always prefer rural US to any Cayman or otherwise reptilian named tropical paradise....I actually do not like tropics.
And it does not have to be immediate.....winter will be over at some point and then many of us might be looking for a cooler place for a change.
Been to Cayman once. For a day. During a cruise. Got bored out of my mind. Oh.....drove a Jeep Wrangler on the left side of the road. What a drag. If I am ever to do that again, this better be justified by me being in the UK. I like UK.And at least if I hit something big, it will be a classy thing like a lorry or a doubledecker, not a truck or a ....Cayman doubledecker. BTW is this why it is called doubledecker? It decks you once, then decks you the second time?
Posts: 239
Threads: 10
Joined: Dec 2013
City: Columbia, SC
It's always nice and warm down in SC
Posts: 599
Threads: 24
Joined: Jan 2014
City: Edmonton AB CA
No matter to me where it is, it will be a long trip! I would be willing to go most anywhere for a get together like this given enough notice. Maybe it could be in conjunction with one of the larger radio meets.
Gregb
Users browsing this thread:
|
Recent Posts
|
Restoration of the Canadian General Electric A-87
|
Thanks for your help Michael. In fact, this video is only an intermediate result. Later I had to apply another tinting l...RadioSvit — 09:01 AM |
Restoration of the Canadian General Electric A-87
|
Great job on the cabinet.
PS. In the US notation, "kenotron" refers to specific type of tubes; we call re...morzh — 08:24 AM |
Part numbers to model cross
|
This document has at least some tables of models and parts used.
Example: Choke 32-7572, used in 604 radio.
Search f...morzh — 08:19 AM |
Restoration of the Canadian General Electric A-87
|
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM |
Restoration of the Canadian General Electric A-87
|
Well... While the varnish is drying up, I started repairing the chassis...
Of course I started by replacing the pa...RadioSvit — 07:12 AM |
Philco Model 38-7: what caps & resistors do fail typically?
|
Hello Martin,
Welcome aboard our little community what great Model 38-7
Sincerely Richardradiorich — 12:30 AM |
Philco Model 38-7: what caps & resistors do fail typically?
|
Welcome to the Phorum Martin.
I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM |
Part numbers to model cross
|
Jim,
We have this index put together by Dale Cook but I don't think that is quite what you are looking for.
The Parts...klondike98 — 09:37 PM |
Philco Model 38-7: what caps & resistors do fail typically?
|
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM |
Philco 42-345 Restoration/Repair
|
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM |
Who's Online
|
There are currently no members online. |
|

|