Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco D-10A Cartridge
#1

The Philco 46-1209 that I am working on for a friend has the D-10A magnetic cartridge. The cartridge works and has an original style needke in it so it is OK. has anyone found a source for these needles or are they still unobtainium? I need to re-flock the turntable and get a new idler but I don't want to spend that money if I can't provide my friend with a player that he can't get spare needles for.

What about the possiblity of converting it to the D-10 crystal cartridge which I understand is still available? I know the output will be higner but that can probably handled with some mods. I was thinking more of mounting the carttridge.

Any other suggestions?

Thanks,
Wayne
#2

You have to get real lucky to find a needle for the D10A, I found one on ebay once, only once. it is virtually uno btainable, there are others still trying to find one. I hear you can switch to the D10 tone arm with the crystal cartridge instead.
#3

Keep checking ebay it's your best bet I was luck enough to get one.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 861 online users. [Complete List]
» 1 Member(s) | 860 Guest(s)
Avatar

>