Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Resto pics for Tab10672
#1

Hey,

I know you wanted to see the resto pics for the Airline and Aircastle radios, so here they are.

I fully stripped most of the veneer and did about 10 spot patches on the cabinets. I glued down all the underwood and separations. The Aircastle needed a new grill so I fashioned one and matched it. I stripped all of the old finish and gave them 2-3 coats of grain filler.
               


I stripped the chassis', derusted, cleaned, polished the Aircastle chassis but had to paint the Airline due to the pitting. I am in the recapping and rewiring stage for both.
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

   
       

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

Wow, Kirk! Wow! Wow x 10!
Respects!
#4

Looks great, I always liked the look of the larger one. It is nice to know they will live on rather than thrown away by someone who wouldnt take the time to repair the cabinets. I cant wait to see the finished 84
#5

Toning the Airline today:


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#6

Looking good!!

The artist formerly known as Puhpow! 8)
#7

thanks Pow,
I finished her today minus the speaker I need to send out for repair.

Does this grill cloth look really bad??? please be honest.. It is the whiskey rayon but I dont know.... Maybe not in this radio...

Does anyone think I should use some contrasting toner? I think she just looks BLAH! Maybe darker on the side columns?


Attached Files Image(s)
           

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#8

I think the original cloth was whiskey, like the 70/90 cloth.
#9

this is the whiskey cloth. It actually is a bit different than the original. This one has smaller clusters. it is from Ken, the original in this radio is much more like the one from radiodaze but the color from radiodaze is too gold.
Dont know why this one looks green.

May have to do something about it.

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#10

I wish someone would try to duplicate the old 70/90 grille cloth accurately again.

The previously available replacement cloth from John at grillecloth.com was great and looked very original as to pattern and color, but the latest attempts are not even close.
#11

I thought the green tint was just photo lighting. The original cloth for that radio was identical to the original whyskey cloth sold by grillcloth.com. What you have may be as close as you are going to get.
#12

At one time I had an Aircastle very similar to that model. I always wondered what year it dated to?

   

Greg V.
West Bend, WI
Member WARCI.org
#13

Yes, I have seen that model Aircastle when searching for this one online.
I like that grill more than this one.
I just don't have any love for battery sets. Icon_lol
Unless it has a working battery...

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Electrolytic restuffing/internals
I don’t have a vise so I had to hold it in my hand. Not optimal but covered up by the hvac tape in the end. I have a few...bridkarl — 11:52 PM
Electrolytic restuffing/internals
Bridkarl A question. For a hacksaw the cut looks a little...jagged. Why?morzh — 11:45 PM
The list of my radio & TV collection!
As usual, an interesting post from you, Peter. This seems to be similar to the RCA 3-BX-671 and the Zenith Transoceanic...MrFixr55 — 11:41 PM
The list of my radio & TV collection!
Hello Peter, Thank you for sharing your new video and looks like your weather is nice their too. it was like 25 Cel...radiorich — 11:05 PM
Electrolytic restuffing/internals
hello bridkarl, I will post some better photos ! Sincerely Richardradiorich — 10:14 PM
Electrolytic restuffing/internals
I just taped the two pieces of the cap together, but I can see your method is better. I just held the lead in with solde...bridkarl — 08:18 PM
Electrolytic restuffing/internals
hello bridkarl, Well done ! Here is a Photo of the base of Philco capacitor that I cut open you can see how I glued th...radiorich — 08:14 PM
philco predicta
Hi CGL18, Here is a link for the schematic from the Early television Foundation: WARNING!! One side of the Chassis i...MrFixr55 — 08:09 PM
The list of my radio & TV collection!
Peter; I like Canadian General Electric sets, whilst the model numbers are often the same as their U.S General Electr...Arran — 05:44 PM
Electrolytic restuffing/internals
Did as suggested. Cut can with hacksaw, removed internals, attached new 8mf cap - with ample use of cardboard and elec...bridkarl — 03:36 PM

[-]
Who's Online
There are currently no members online.

>