Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What is your Pride & Joy radio? Owned or wanted...
#46

From the lanyard ring I assume it is a military weapon. What caliber is it?
#47

It has 6 stations but no volume control, lol
I don't remember the caliber but it is one that I had to have made
The old saying is: Great condition, only dropped once.

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#48

My Pride and Joy is my Zenith 16A61 Stratosphere, Now if I could only find The original Cloth I would be a Happy Camper !!!
#49

Mine is my Grandparents radio (fully restored) that Grampa listened to WGN baseball and Grama listened to
Wally Philips in the mornings. Was able to relive some of my memories listening to it with
them, as well when I was in grade school.

Emerson Model 535
[Image: http://www.philcorepairbench.com/images/535.jpg]


Chuck
#50

I don't really have a favorite. I mostly try to find the little bakelite tabletop ones from the 40's and the wooden tabletop ones from the 30's. I admire the big 30's consoles from afar, but they're not for me. I have one and that's enough.
Jim




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM

[-]
Who's Online
There are currently 2725 online users. [Complete List]
» 3 Member(s) | 2722 Guest(s)
AvatarAvatarAvatar

>