Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco D10 / D10a Pictures
#1

Hi,

I am looking for some good pictures that show the underside of the D10 / D10A that show the alignment of the various parts of the turntable/ The copy of the PhotoFacts that I have are very difficult to see.

Thanks,
Wayne
#2

I have a lot to do the next few days, overtime at work ,taxes ( I know, I know, it should have been done by now), etc but I will try to get a pic put up after the weekend if you like. If for some reason I don't, please remind me. By the way Chuck Schwark has a very good write up showing adjustments, etc if you want one, contact him also. Warren
#3

Thanks Warren. That would be great. I will also try to find the stuff from Chuck that you mentioned.

-Wayne
#4

Hey Wayne, I got my taxes done early so I uploaded a picture of the bottom of my D10A phonograph. My phonograph works, so it should be good the way it is here. Seems to show all but if you need more let me know. Also, here is a link to chucks schematic page, you can write him from there and ask him about it. He has the best info around.
http://www.philcorepairbench.com/schematics.htm , Warren

[Image: http://i1348.photobucket.com/albums/p721...4abdd9.jpg]




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM
Philco model 38 code 121 not receiving signal.
Thankyou for the kind words sir. I double checked it with my component tester and it read 2.7 ohms at .02mH.Stormlord5500 — 08:14 AM
PT 6 chassis screws size???
Hello bridKarl, that sounds right or maybe 8/32 . Sincerely Richardradiorich — 01:00 AM
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM

[-]
Who's Online
There are currently 857 online users. [Complete List]
» 1 Member(s) | 856 Guest(s)
Avatar

>