Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help with Identification.
#1

Does anyone recognize this radio? The only identification is the name Royal on the escutheon. When new it would have had all globe tubes. The line up is left to right 280, Pentode, 224,224,224,224. The sockets are stamped with that information. A number 47 is in the pentode socket.
I also posted this on the other site which has had 178 views so far but no luck identifying the manufacturer.
Thanks,
Henry


Attached Files Image(s)
       
#2

Well royal is a company that was run by DeForest who was owned by Crosley. I dont see it online but many radios were not documented. Halson radios are notorious for that as are smaller name brand branch off's.

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

I saw this one on K-town show.
I remember commenting that it looked a whole lot like the Philco 20 (latticework is different but the shape and the spiral grove ornament are similar).

Is it a Gloritone by chance?
Or it could be a Zenette.

http://www.radioatticarchives.com/radio.htm?radio=6153
http://www.tuberadioland.com/zenithL_main.html
#4

Kirk and Mike,
I am really stumped with this one. Kirk,
Deforest was suggested tome earlier but I can find nothing really.
Mike, The Gloritone at least looked more similar with the tube shield in the back.
I too was struck by how much it reminded me of a Philco 20 and it is almost as large. I don't recall another radio with that tubes and shield only look from the back. Also I have never seen a tube socket stamper pentode, always if stamped the tube number is stamped.
My old IRC catalogs list a Royal 9v but the tube line up is different when I looked it up in Rider's.
I am really hoping someone here will know this radio.
Thanks for the response.
Henry
#5

I regret now I did not remember the brand, it had exact same front as yours.
As for repairs, this is likely a TRF and a common sense recap/recarb will probably do it, and alignment should be simple as if it is a TRF there is no heterodyne alignment song and dance. Even with no sch this should be no too bad.
#6

Sort of reminds me of an early west coast set; there were a lot of small garage operations going on out there during this time frame. Maybe looking through the Floyd Paul books will give you a clue:

http://www.antiqueradios.org/paul-bks.html

Otherwise, like morzh said, as a TRF repairs should be fairly straightforward.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#7

Eliot Ness,
Thanks for the tip . Maybe someone who has those books will take a look for me.
Henry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
philco predicta
The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM
Philco model 38 code 121 not receiving signal.
I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM
Philco model 38 code 121 not receiving signal.
Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM
Philco model 38 code 121 not receiving signal.
The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM
Philco model 38 code 121 not receiving signal.
So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM
My collection presentation
There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM
Electrolytic restuffing/internals
Bridkarl This specific cap you have is the easiset type to restuff. I usually cut it at the upper border of the depr...morzh — 11:35 AM
philco predicta
Hi CGL18, First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens: ...MrFixr55 — 08:22 AM
Another amp build - here I go again!
Sweet! I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM
PT-6 finished!!
Hi Gang, Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM

[-]
Who's Online
There are currently no members online.

>