Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
No matter where you go, there you are.
Posts: 142
Threads: 15
Joined: Nov 2008
City: Glenshaw, PA
Posts: 16,510
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Posts: 1,470
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Great find.. And the cabinet and grill cloth look nice.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
Thanks! I have never really pursued these style Philcos before, but this one was just in too good of shape and the price was right. Now, I will need new pushbuttons for sure and I think this model used the transluscent 'wine' color buttons. Kinda hard to tell as my buttons have degraded down to flakes, literally! Also, what would be the best way to get the green tarnish off the bezel? I have some Brasso, but I don't want to go too far and lose all the patina.
No matter where you go, there you are.
Posts: 152
Threads: 11
Joined: Feb 2013
City: Dallas, TX
Very nice find, Jayce! I might have a set of the repro wine buttons around here, actually.
Posts: 403
Threads: 40
Joined: Feb 2011
City: McPherson, KS
Amazing...you never know.
Posts: 4,899
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Depending on the year the dial escutcheons on those sets could be bright brass, painted a gold colour, or have a faux wood grain.
Regards
Arran
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
For 1939-1942 Philco escutcheons with thumbwheel controls:
I think the 1939 model escutcheons are brass. The 1940 escutcheons are brass plated (or painted) steel. The 1941 and 1942 escutcheons have the faux woodgrain.
--
Ron Ramirez
Ferdinand IN
Posts: 4,899
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Unless they used up stock from the previous year, the escutcheon they used on my 40-780 was brass, I do not know if it used to have paint on it or no. Bob Andersen's 39-30 was brass but was painted with metallic gold or brass paint rather then bright brass. Neither of these sets used the thumb-wheel knobs however, so the thumb-wheel knob sets like the 39-116 may have been different.
Regards
Arran
(This post was last modified: 06-11-2014, 11:53 AM by Arran.)
Posts: 2,037
Threads: 367
Joined: Jun 2010
City: Dover, OH
I decided to do the magnet test and the little magnet I used will not stick to the escutcheon on the 39-40. So, it is probably brass. As far as any paint goes, that is had to tell, but I have so much crusty green tarnish sticking up that I will have to do cleaning no matter what. Now, the escutcheon on my 40-180 looks like brass, but the magnet sticks right to it.
No matter where you go, there you are.
Posts: 28
Threads: 0
Joined: Nov 2013
City: Tucson, AZ
Check the top corners of the openings where the buttons came through... If there was paint there, that's the most likely place to find any remains.
Pretty set! and the GRILL CLOTH all intact... Unusual.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Electrolytic restuffing/internals
|
Bridkarl
This specific cap you have is the easiset type to restuff.
I usually cut it at the upper border of the depr...morzh — 11:35 AM |
philco predicta
|
Hi CGL18,
First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens:
...MrFixr55 — 08:22 AM |
Another amp build - here I go again!
|
Sweet!
I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM |
PT-6 finished!!
|
Hi Gang,
Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM |
Electrolytic restuffing/internals
|
Look here:
Philco-F676-124
Vlad95 — 08:02 PM |
PT-6 finished!!
|
Well the 35Z3 doesn't have a tap on the tube heater for a pilot light, so in this set they have the dial lamp paralleled...Arran — 06:21 PM |
Electrolytic restuffing/internals
|
Thanks. I think I try to cut this as suggested. I don’t have a lathe, but I do have a tap and die set. I am going to see...bridkarl — 04:46 PM |
Another amp build - here I go again!
|
Hey all! Well, I guess that with what I learned from my last build, it's time to move up the ladder another rung and tak...TV MAN — 04:38 PM |
Electrolytic restuffing/internals
|
There are various ways to handle this, one is to cut near just above that rolled in area is near the bottom, using the r...Arran — 04:36 PM |
philco predicta
|
If you have a television signal generator (a must-have for TV repair) and an oscilloscope (the same), then this problem ...RadioSvit — 04:23 PM |
Who's Online
|
There are currently 2010 online users. [Complete List] » 2 Member(s) | 2008 Guest(s)
|
|
|

|