Rebuilt in the 40s by a Philco Shop?
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
I seldom find repair work that I like. Most is OK. A lot is BAD. I remember on chassis I was so impressed with, It had a repair tag, that I tried to find the shop in SF CA that did the work. It wasn't there anymore.
Anyway, here is the chassis from the 15 that I posted a few weeks ago. It appears to have been rebuilt by a Philco shop with all new Philco caps and a complete set of Philco tubes (ST post 1937).
They carefully trimmed the connection on the Bakelite blocks before installing new caps. I see an exception, that I suspect has an imbedded resistor. I will have to check.
So, I wonder if restoring the "repair" would be more historically significant than the "normal" restoration. They did damage the blocks, if only in a small way. And It will have to be a restuff anyway, the blocks being easier, in my opinion.
The chassis is almost spotless. I think that this radio will take the place of the 37-116 in our living room.
I have yet to find an indication of which shop did the work.
[attachment=4850]
[attachment=4851]
[attachment=4848]
[attachment=4849]
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
(This post was last modified: 01-05-2015, 10:22 PM by Phlogiston.)
Posts: 16,511
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
To me it is not that important.
I would keep the repair as it was, after all, a Philco shop, and this relates to the history of the radio.
Re-stuff the tubulars.
I mean, those times, they did not regard it as restoration, they did repairs, and I accept that and I would keep that.
PS. The chassis looks very much like 111.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Yeah, except for the light hanging out of the bottom.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 5,170
Threads: 274
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Interesting dilemma...restore to the original or restore to an historical repair. Do you include documentation of what you did in the restoration Russ? If so, it could indicate the restoration is an example of a 1940's repair job. That would make it clear to the next owner whats what. If not, I think if you were to sell it, I'd rather see an original restoration. Just my 2 cents.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
On most of my restorations, for myself, and those that I have done for others, I keep a photo-record, which is where these pictures are coming from.
You've seen my before and after pictures?
Thanks for both of your input(s). If this chassis were not so nice and if it weren't a 15X going into my living room. I am sure that I would restore the repair - if that makes any sense.
I would like more opinions, especially if Ron happens to visit this site. Ah, but he's probably out messing with some Fisher stereo or something. 
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 3,158
Threads: 59
Joined: Apr 2011
City: Lexington, KY
I'd restore the repair for one simple reason.... you can restore a radio back to original almost anytime, but you rarely find such a nice example of an early repair. Either way it will be a very nice example for display.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 16,511
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
How many examples of authentic Philco repairs are there? Few. You have one.
And , speaking of Living room, repair is not the part that is displayed anyway.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Phlogiston Wrote:I would like more opinions, especially if Ron happens to visit this site. Ah, but he's probably out messing with some Fisher stereo or something.
Thanks for asking. I'm here every day but I have been busy lately, only not with a Fisher - I'm slowly rebuilding a 37-690 amp/power supply chassis.
Anyway...I say do what suits you. You seem inclined already to replicate the 1940s repair by restuffing the paper caps, so if that's what you want to do, then by all means, you should.
--
Ron Ramirez
Ferdinand IN
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
An interesting set!!
What gets me is that vice replacing the bakelite blocks with new replacements, the "Tech" laid wax/paper caps over them after removing the bakelite-block terminals.
If you are inclined to do so, I would re-stuff the paper replacement caps and preserve the "repair."
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
[attachment=5116]
[attachment=5117]
[attachment=5118]
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
(This post was last modified: 01-05-2015, 10:22 PM by Phlogiston.)
Posts: 16,511
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
It has a very imposing presence.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Yes. With only very little toner, applied to the columns only, it is naturally very dark wood.
Sue likes it. It is now in the kitchen.
It replaced this radio:
[attachment=5119]
[attachment=5120]
-Which I will now have to sell.
It is all restored/recapped/restuffed. Sold
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
(This post was last modified: 01-05-2015, 10:23 PM by Phlogiston.)
Posts: 16,511
Threads: 572
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Well, as a furniture maybe the 15 is better.
But as a radio the other one wins.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Yes it does, but we try to limit our "collection" to Pre 1940 radios anyway.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 893
Threads: 9
Joined: Mar 2008
City: Vieques, PR USA
State, Province, Country: PR
It looks to me like the old caps are still in the circuit. I'd recommend cutting the little wires that come thru the rivet and push them down inside the block.
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
philco predicta
|
| The model is the holiday without UHF It has no sound and I don't have an oscilloscope or signal generator.cgl18 — 08:51 PM |
|
Philco model 38 code 121 not receiving signal.
|
| I will definitely check my lead length and wire dressing. Thanks for the ideas.Stormlord5500 — 08:06 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Do make sure that you twist the 3 wires from the chassis to the transformer, and dress away from tubes, especially audio...MrFixr55 — 07:38 PM |
|
Philco model 38 code 121 not receiving signal.
|
| The cone unfortunately got damaged when I removed it. The glue that held the cone to the basket was sloppily applied and...Stormlord5500 — 07:12 PM |
|
Philco model 38 code 121 not receiving signal.
|
| So what was wrong with the original speaker? Was the cone damaged? Unless it's totally hopeless I would put it aside as ...Arran — 05:31 PM |
|
My collection presentation
|
| There is an article on my site that introduces the first portable radios in my collection. I have only provided a link t...Vlad95 — 01:17 PM |
|
Electrolytic restuffing/internals
|
| Bridkarl
This specific cap you have is the easiset type to restuff.
I usually cut it at the upper border of the depr...morzh — 11:35 AM |
|
philco predicta
|
| Hi CGL18,
First off, welcome to the Philco Phorum. I have not worked on a TV for a while but here are some givens:
...MrFixr55 — 08:22 AM |
|
Another amp build - here I go again!
|
| Sweet!
I actually have a Dynaco Mark 4 that I had been running with 6L6s with no mods. Seemed to my 14-year-old head a...MrFixr55 — 12:57 AM |
|
PT-6 finished!!
|
| Hi Gang,
Tube heaters are not "Ohmic" devices (that maintain specified resistance over wide temperature, c...MrFixr55 — 12:03 AM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
